| NATIONAL 12-P-160SW |
| FLUID END MODULE & ACCESSORIES |
| | | |
| ITEM | PART NUMBER | DESCRIPTION | QTY/PUMP |
| | FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEMS 1-29) | 3 |
| 1 | PREM-FEM12PDISSWNS | MODULE, DISCHARGE STUDDED(INCLUDES ITEMS 1,3-8,10) | 3 |
| 2 | PREM-FEM12PSUCSWNS | MODULE, SUCTION STUDDED (INCLUDES ITEMS 2, 7,8) | 3 |
| 3 | PREM-12PDSUCSSW | STUD, DISCHARGE TO SUCTION MODULE | 18 |
| 4 | PREM-6300281 | NUT, DISCHARGE TO SUCTION STUD | 18 |
| 5 | PREM-2408029 | STUD, POWER END | 30 |
| 6 | PREM-6300220 | NUT, POWER END STUD | 30 |
| 7 | PREM-12PTRSSW | STUD, THREADED RING | 72 |
| 8 | PREM-6300240 | NUT, THREADED RING STUD | 72 |
| 9 | PREM-6511416 | PIN, DOWELL | 6 |
| 10 | PREM-PEP75 | CAPSCREW, LINER RETAINER FLANGE | 18 |
| 11 | PREM-PP6021260SW | PLATE, LINER WEAR | 3 |
| 12 | PREM-1290344 | GASKET, WEAR PLATE AND MODULE - RUBBER | 6 |
|
| 13 | PREM-12PLASW | FLANGE, LINER RETAINER (LINER BUSHING) | 3 |
| 14 | PREM-12PLANSW | NUT, LINER RETAINER | 3 |
| 15 | PREM-12PVCASSYSWNS | ASSY, VALVE COVER PLUG (INCLUDES ITEMS 16,20,21,22) | 6 |
| 16 | PREM-12PVCSWNS | PLUG, VALVE COVER | 6 |
| 17 | PREM-12PFLGSW | RING, THREADED (THREADED FLANGE) | 6 |
| 18 | PREM-12PCAPSW | CAP, THREADED (SCREW GLAND) | 6 |
| 19 | PREM-07207119 | SEAL, VALVE COVER PLUG - RUBBER | 6 |
| 20 | PREM-12PVGASWNS | ASSEMBLY, VALVE GUIDE (INCLUDES ITEMS 20 & 21) | 6 |
|
| 21 | PREM-PZ789VG1 | BUSHING, VALVE GUIDE | 6 |
| 22 | PREM-50C125KFCYB | SCREW, VALVE GUIDE | 12 |
| 23 | PREM-1540851 | GASKET,SUCTION MANIFOLD | 3 |
| 24 | PREM-NAT12PDSMA | ADAPTER, DISCHARGE | 2 |
| 25 | PREM-2410031437 | SEAL, DISCHARGE ADAPTER | 4 |
| 26 | PREM-NAT12PDSMC | CONNECTOR, DISCHARGE | 2 |
| 27 | PREM-2410031433 | SEAL, DISCHARGE CONNECTOR TO DISCHARGE ADAPTER | 2 |
|
| 28 | PREM-700030711 | CAPSCREW, DISCHARGE CONNECTOR (W /LOCKWASHER) | 16 |
| 29 | PREM-1292175 | RING, BACKUP (DISCHARGE CONNECTOR) | 4 |
Southwest’s RnR Piston is a renewable rubber piston in that the rubber on this non-bonded
piston can be replaced by a new piston rubber once the old one has
reached its usable life. The proprietary blend of rubber and fabric
used in the RnR piston resists the pinching and extrusion that
commonly occurs in the heel of the piston. The use of synthetic
fabric in the Southwest RnR piston virtually eliminates the loss of
heel strength, caused by water absorption allowing the piston to
achieve a higher level of performance compared to competing
designs.
The RnR piston is suitable for water and some synthetic- based
drilling muds.
SIZE |
COMPLETE PISTON PART NO. |
END PLATE PART NO. | PISTON RUBBER PART NO. |
PISTON CORE PART NO. | PISTON O- RING PART NO. | PISTON BUSHING PART NO. |
SNAP RING PART NO. |
| 4" | 40KH01-4 | 3440K | 40K | 40KH01-4C | 568-225 | 2932 | K921129 |
| 4 1/2" | 44KH01-4 | 4244K | 44K | 44KH01-4C | 568-225 | 2932 | K921129 |
| 4 1/2" | 44BH01-4 | 4446B | 44B | 44BH01-4C | 568-225 | 2932 | B921129 |
| 5" | 50BH01-4 | 5052B | 50B | 50BH01-4C | 568-225 | 2932 | B921129 |
| 5 1/2" | 54BH01-4 | 5052B | 54B | 54BH01-4C | 568-225 | 2932 | B921129 |
| 6" | 60BH01-4 | 5456B | 60B | 60BH01-4C | 568-225 | 2932 | B921129 |
| 6 1/4" | 62BH01-4 | 6200B | 62B | 62BH01-4C | 568-225 | 2932 | B921129 |
| 6 1/2" | 64LH01-4 | 6466L | 64L | 64LH01-4C | 568-225 | 2932 | L921129 |
| 6 3/4" | 66LH01-4 | 6466L | 66L | 66LH01-4C | 568-225 | 2932 | L921129 |
| 7" | 70LH01-4 | 7072L | 70L | 70LH01-4C | 568-225 | 2932 | L921129 |
Key Features Include:
ü Available for single and double-acting pump designs
ü Replacement rubber insert reduces operating expense
ü Proprietary blend of rubber and fabric reduces heel pinching and
extrusion
ü Synthetic fabric yields a stronger, denser and stiffer heel for
superior performance
All our fluid end parts are manufactured to API 7K quality
standards.
Parts are available for these popular pump models:
BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000,
F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500,
D-375, D-700,
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,
National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220,
E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG,
KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,
Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200
Russian Mud Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L,
NB125, NB80, NB50, NB32
WEATHERFORD/Ellis Williams: E-447, E-2200
Drillmec Mud Pump: 9T1000, 12T1600, 7TS600, 7TS500, 9T800
Romania Mud Pump: 3PN-1000, 3PN-1600, 3PN-2000
And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson,
Gaso, Skytop/Brewster.
Brewster ® Mud Pumps B-550 • B-750 • B-1000 • 1100T • B-1300
Continental Emsco ® Mud Pumps F-350 • F-500 • F-650 • F-800 •
F-1000 • FA-1300 • FB-1600 FB1600
Gaso ® Mud Pump 1563 • 1740-55 • 1844-60 • 2010-50 • 2200-49 • 2651
• 2652
Gardner Denver ® Mud Pumps
PAH • PZ-7 PZG • PZ-8 PZH • PZ-9 PZJ • PZ-10 PZK • PZ-11 PZL
Gardner Denver ® Well Service TEE • PE-5 • PA-8 • PAH • PJ-8 •
TGF-225
Gardner Denver ® Continuous Duty GD-55T • GD-60T • GD-100T •
GD-125T • GD-150T • GD-180T • GD-200T
Ideco ® Mud Pumps MM-200 • MM-300 • MM-500 • MM-500F • MM-550
Ideco ® Mud Pumps MM-550F • MM-700 • MM-700F • T-500
Ideco ® Mud Pumps T-500 • T-800 • T-1000 • T-1300 • T-1600
National ® J Series Mud Pumps J-30 • J-60 • J-100 • J-165 • J-275 •
J-375 • J-625 • JWS-340 • JWS-400
National ® Mud Pumps K-280 • K-380 • K-500 • K-500A • K-700A
National ® P Series Mud Pumps 7P-50 • 8P-80 • 9P-100 • 10P-130 •
12-P-160 / 12P-160 / 12P160
Oilwell ® Mud Pumps A-350-PT • 560-PT • A-560-PT • 850-PT •
A-850-PT • 1100-PT
Oilwell ® Mud Pumps A-1100-PT • 1400-PT • A-1400-PT • 1700-PT •
A-1700-PT / A1700-PT
Oilwell ® Plunger Pumps C-323 through B-558 • SA-640-50 through
SB-644-B
OPI ® Mud Pumps 350-D • 00-DL • 700-HDL • 1000-HDL
Wheatley ® Mud Pumps 1036 • 6070 • 7024 • 7036
Fluid End Modules
National® - Oilwell® - Continental Emsco® - Gardner Denver® -
Ideco® - Skytop Brewster®
Pulsation Dampener
Hydril Type "K" Pulsation Dampener
Popular Mud Pump Spare Parts
| Gardner Denver PZ-11 & PZ-10 FLUID END MODULE & ACCESSORIES |
| | | | |
| ITEM # | OEM PART # | MISSION PART # | DESCRIPTION | QTY PER PUMP |
| | FEMPZ1011CA | ASSY, COMPLETE FLUID END MODULE (INCLUDES ITEMS 1-21) | 3 |
| 1 | 202PZL029B | FEMPZ1011 | MODULE, STUDDED FLUID END (INCLUDES ITEMS 1-8) | 3 |
| 1B | | 80721022 | MODULE, STUDDED FLUID END MADE FROM 4135 MATERIAL (INCLUDES ITEMS
1B-8) | |
| 2 | 201PZL110 | PZ1011LCS | STUD, FRAME & LINER CLAMP LONG | 24 |
| 3 | 205PZL110 | PZ1011GPFS | STUD, FRAME & LINER CLAMP SHORT | 24 |
| 4 | 50B36 | 6300200 | NUT, FRAME & LINER CLAMP STUD | 72 |
| 5 | 204PZL110 | PZ1011TRS | STUD, THREADED RING | 72 |
| 6 | 50B34 | PZ789TRSN | NUT, THREADED RING STUD | 72 |
| 7 | 202PZL110 | PZ789DMS | STUD, DISCHARGE MANIFOLD | 12 |
| 8 | 50B34 | PZ789TRSN | NUT, DISCHARGE MANIFOLD STUD (SAME AS ITEM 6) | 12 |
| 9 | 200PZL387 | PZ1011FLG | RING, VALVE COVER THREADED | 6 |
| 10 | 204PZL715 | 7916780 | GASKET, VALVE COVER - RUBBER (SEE DATASHEET FOR ALTERNATE
MATERIALS) | 6 |
| 11 | 2007674 | PZ789VGI | BUSHING, VALVE GUIDE | 6 |
| 12 | 200PZL147 | PZ1011VC | COVER, VALVE | 6 |
| 13 | 200PZL587 | PZ1011CAP | CAP, VALVE COVER LOCK | 6 |
| 14 | 2011701 | PZ789PL | PLATE, RETAINER | 3 |
| 15 | 200PZL483 | PZ1011LVG | GUIDE, VALVE SUCTION | 3 |
| 16 | 655EE065 | PZLVGABOLT | SCREW, VALVE GUIDE TO RETAINER PLATE | 6 |
| 17 | 95W2 | PZLVGAWASHER | WASHER, VALVE GUIDE LOCK | 6 |
| 18 | 25AL35 | 7916747 | GASKET, DISCHARGE MANIFOLD | 3 |
| 19 | 25BE41 | 7923283 | GASKET, SUCTION MANIFOLD | 3 |
| 20 | 200PZL455 | PZ1011LC | CLAMP, LINER | 3 |
| 21 | 200PZL483A | PZ1011LVGA | ASSY, LOWER VALVE GUIDE ( INCLUDES ITEMS 11, 14-17) | 3 |
| 22 | 655EG08N | 700044111 | CAPSCREW, SUCTION MANIFOLD - NOT SHOWN | 24 |
| 23 | | 7619066 | WASHER, SUCTION MANIFOLD CAPSCREW 3/4" REGULAR SPRING LOC-NOT SHOWN | 24 |
| | 7924509 | MODULE SEAL KIT: (KIT INCLUDES CYLINDER HEAD, VALVE COVER GASKET,
LINER GASKET, DISCHARGE MANIFOLD GASKET, SUCTION MANIFOLD GASKET) | 3 |
| CONTINENTAL EMSCO FC-1600 7500 PSI FLUID END MODULE & ACCESSORIES |
| | | |
| ITEM # | PART # | DESCRIPTION | QTY PER PUMP |
| - | 0-6316-0452-10 | ASSY, COMPLETE FLUID END (INCLUDES MANIFOLDS) | 1 |
| 1 | 0-6316-0610-01 | MODULE, DISCHARGE STUDDED | 3 |
| 2 | 0-6316-0611-00 | MODULE, SUCTION STUDDED | 3 |
| 3 | | STUD, THREADED RING | |
| 4 | | NUT, THREADED RING AND DISCHARGE MANIFOLD STUD | |
| 5 | | STUD, SUCTION TO DISCHARGE MODULE | 6 |
| 6 | | NUT, SUCTION TO DISCHARGE MODULE AND POWER FRAME STUD | 6 |
| 7 | | STUD, DISCHARGE MANIFOLD | |
| 8 | | STUD, POWER FRAME | |
| 9 | 0-7601-0342-29 | CAPSCREW, SPACER FLANGE | 24 |
| 10 | 0-6316-0614-00 | THREADED RETAINER | 6 |
| 11 | 0-6316-0615-00 | THREADED RING | 6 |
| 12 | 0-7601-0040-11 | EYEBOLT, 3/4 X 4.50 | 6 |
| 13 | 0-6316-0616-00 | VALVE POT COVER | 6 |
| 14 | 0-6316-0585-00 | VALVE GUIDE | 6 |
| 15 | 0-6323-0093-00 | RETAINER, VALVE GUIDE | 6 |
| 16 | | CAPSCREW, VALVE GUIDE RETAINER | |
| 16A | | LOCK WASHER, VALVE GUIDE RETAINER CAPSCREW | |
| 17 | 0-6316-0583-00 | BUSHING, VALVE GUIDE | 6 |
| 18 | 0-6316-0092-00 | GASKET, VALVE COVER | 6 |
| 19 | 0-7601-0820-10 | DOWEL PIN | 12 |
| 20 | 0-7602-1600-61 | O-RING (SUCTION MANIFOLD TO F.E.) | 3 |
| 21 | 0-6316-0565-00 | GASKET, FE MODULE & WEAR PLATE | 6 |
| 22 | 0-7602-1600-25 | O-RING (DISCHARGE TO F.E.) | 3 |
| 23 | 0-6316-0566-01 | DISCHARGE MANIFOLD (NOT SHOWN) | 1 |
| 24 | 0-6316-0613-00 | SPACER FLANGE | 3 |
| 25 | 0-6316-0367-20 | LINER LOCK | 3 |
| 26 | 0-6316-0668-00 | WEAR PLATE | 3 |
| 27 | 0-6316-0523-00 | SUCTION MANIFOLD (NOT SHOWN) | 1 |
| 28 | 0-7601-0333-30 | CAPSCREW, SUCTION MANIFOLD | 18 |
| MISSION "L" MODULE FOR EMSCO FB-1300, FB-1600 FLUID END MODULE &
ACCESSORIES |
| ITEM # | SW PART # | MISSION PART # | DESCRIPTION | QTY PER PUMP |
| 8490-2A | FEMFB13ASSYSW | FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEMS 1-27) | 3 |
| 1 | 8490-1D | FEMFB13DISSW | MODULE, STUDDED DISCHARGE (INCLUDES ITEMS 1, 3-10, 12) | 3 |
| 2 | 8490-2S | FEMFB13SUCSW | MODULE, STUDDED SUCTION (INCLUDES ITEMS 2, 5, 6) | 3 |
| 3 | 4016-97 | EMSFB13DSUCSSW | STUD, DISCHARGE TO SUCTION MODULE | 18 |
| 4 | | 0-7601-0630-17 | NUT, DISCHARGE TO SUCTION STUD | 18 |
| 5 | Feb-15 | OWA17TRSSW | STUD, THREADED RING | 72 |
| 6 | | 6300200 | NUT, THREADED RING STUD | 72 |
| 7 | Sep-16 | EMSFB13PFSSW | STUD, POWER FRAME | 18 |
| 8 | | 0-7601-0630-17 | NUT, POWER FRAME STUD | 18 |
| 9 | 4017-36 | PEP80 | CAPSCREW, LINER RETAINER FLANGE (SOCKET HEAD) | 24 |
| 10 | 4017-46 | EMSF1000DMSSW | STUD, DISCHARGE MANIFOLD | 12 |
| 11 | | 0-7601-0630-24 | NUT, DISCHARGE MANIFOLD STUD | 12 |
| 12 | May-88 | 6511416 | PIN, DOWELL | 6 |
| 13 | 2988 | 1290344 | SEAL, SUC TO DISCH MOD & WEAR PLATE - RUBBER (SEE DATASHEET FOR ALT
MATLS) | 6 |
| 14 | Mar-22 | EMSF1000ARSW | RING, LINER RETAINER PILOT | 3 |
| 15 | Mar-90 | EMSFB13WPSW | PLATE, LINER WEAR | 3 |
| 16 | Mar-90 | EMSFB13LRPSW | FLANGE, LINER RETAINER | 3 |
| 17 | Jan-90 | EMSFB13LLSW | NUT, LINER LOCK | 3 |
| 18 | P-129 | 7207129 | GASKET, VALVE COVER - RUBBER (SEE DATASHEET FOR ALTERNATE
MATERIALS) | 6 |
| 19 | 4016-99 | PEP73 | CAPSCREW, VALVE GUIDE | 12 |
| 20 | 4700-I | PZ789VGI* | BUSHING, VALVE GUIDE | 6 |
| 21 | 4775-2R | EMSFB13VGASW | GUIDE, VALVE (INCLUDES ITEM 20) | 6 |
| 22 | 4675-2A | EMSF1000VCASSYSW | PLUG, VALVE COVER (INCLUDES ITEMS 19-22) | 6 |
| 23 | 4475 | OWA17FLGSW | RING, THREADED | 6 |
| 24 | 4575 | OWA17CAPSW | CAP, THREADED | 6 |
| 25 | 568-343 | 99609343 | GASKET, DISCHARGE MANIFOLD | 3 |
| 26 | 568-442 | 99609442 | GASKET, SUCTION MANIFOLD | 3 |
| 27 | 4018-19 | 700048511 | CAPSCREW, SUCTION MANIFOLD | 18 |
All our fluid end parts are manufactured to API 7K quality
standards.
Parts are available for these popular pump models:
BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000,
F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500,
D-375, D-700,
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,
National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220,
E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG,
KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,
Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200
Russian Mud Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L,
NB125, NB80, NB50, NB32
WEATHERFORD/Ellis Williams: E-447, E-2200
Drillmec Mud Pump: 9T1000, 12T1600, 7TS600, 7TS500, 9T800
Romania Mud Pump: 3PN-1000, 3PN-1600, 3PN-2000
And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson,
Gaso, Skytop/Brewster.
1,Plunger Size 3.38” - 4.00” Valve Part No. P107185 Seat Part No.
P107802
Insert Part No. P107186 Spring
2,Plunger Size 4.50” Valve Part No. P107181 Seat Part No. P107180
Insert Part No. P107182 Spring
3,Plunger Size 5.00” - 6.00” Valve Part No. P107188 Seat Part No.
P107187
Insert Part No. P107189 Spring4P102382
SPM2000
1,Plunger Size 3.75" Plunge Part No 3P103887
2,Plunger Size 4.00" Plunge Part No 3P100339
3,Plunger Size 4.50" Plunge Part No 3P100654
4,Plunger Size" 5.00" Plunge Part No 3P100233
5,Plunger Size" 5.50 Plunge Part No 3P107060
6,Plunger Size" 5.75" Plunge Part No 3P107061
7,Plunger Size 6.00 Plunge Part No 3P107062
SPM
TWS 250 Plunger Size 1.75"-3" 3.25"-4"
TWS 400 Plunger Size 2 .50"-3" 3 .50"-4 .50”
TWS 500LW-600 Plunger Size 2 .75" 3"-4 .75"
TWS 600S Plunger Size 2 .50"-3" 3.50"-4 .50"
TWS 900 Plunger Size 3.50"-4"
TWS 1250LW Plunger Size 4"
OPI880 Plunger Size 3.75" 4.00” 4.5” 5.0:” 5.50” 5.75” 6.0”
TWS1000LW,TWS1300
Plunger Size 3.75" 4.00” 4.5” 5.0:” 5.50” 5.75” 6.0” 6.5 “ 6.75”
TWS1600 Plunger Size 3.5” 3.75” 4.0” 4.50” 5.0” 5.5” 5.75 “6.0”
TWS1800 Plunger Size 3.5” 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0”
TWS2250 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2000 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2500 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
5.50” 5.75” 6.0”
TWS2250 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2000 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2500 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5
Brewster ® Mud Pumps B-550 • B-750 • B-1000 • 1100T • B-1300
Continental Emsco ® Mud Pumps F-350 • F-500 • F-650 • F-800 •
F-1000 • FA-1300 • FB-1600 FB1600
Gaso ® Mud Pump 1563 • 1740-55 • 1844-60 • 2010-50 • 2200-49 • 2651
• 2652
Gardner Denver ® Mud Pumps
PAH • PZ-7 PZG • PZ-8 PZH • PZ-9 PZJ • PZ-10 PZK • PZ-11 PZL
Gardner Denver ® Well Service TEE • PE-5 • PA-8 • PAH • PJ-8 •
TGF-225
Gardner Denver ® Continuous Duty GD-55T • GD-60T • GD-100T •
GD-125T • GD-150T • GD-180T • GD-200T
Ideco ® Mud Pumps MM-200 • MM-300 • MM-500 • MM-500F • MM-550
Ideco ® Mud Pumps MM-550F • MM-700 • MM-700F • T-500
Ideco ® Mud Pumps T-500 • T-800 • T-1000 • T-1300 • T-1600
National ® J Series Mud Pumps J-30 • J-60 • J-100 • J-165 • J-275 •
J-375 • J-625 • JWS-340 • JWS-400
National ® Mud Pumps K-280 • K-380 • K-500 • K-500A • K-700A
National ® P Series Mud Pumps 7P-50 • 8P-80 • 9P-100 • 10P-130 •
12-P-160 / 12P-160 / 12P160
Oilwell ® Mud Pumps A-350-PT • 560-PT • A-560-PT • 850-PT •
A-850-PT • 1100-PT
Oilwell ® Mud Pumps A-1100-PT • 1400-PT • A-1400-PT • 1700-PT •
A-1700-PT / A1700-PT
Oilwell ® Plunger Pumps C-323 through B-558 • SA-640-50 through
SB-644-B
OPI ® Mud Pumps 350-D • 00-DL • 700-HDL • 1000-HDL
Wheatley ® Mud Pumps 1036 • 6070 • 7024 • 7036
Fluid End Modules
National® - Oilwell® - Continental Emsco® - Gardner Denver® -
Ideco® - Skytop Brewster®
Pulsation Dampener
Hydril Type "K" Pulsation Dampener
Popular Mud Pump Spare Parts
Mud Pump Manufactures and Models include:
Brewster Mud Pumps
B-550 | B-750 | B-1000 | 1100T | B-1300
Continental Emsco Mud Pumps
FF-FXF | FG-FXG (A thrugh L) | FD-FXX | FC-FXX | FD-FXD | FC-FXD |
FY-FXD
Continental Emsco Mud Pumps
GP-GXP | GR-GXP | GP-GXR | GR-GXR |PA-8 | PAH
Continental Emsco Mud Pumps
PJ8 | PZ-7 | PZ-8 | PZ-9 | PZ-10 | PZ-11 | PXL
Ellis Williams (Luko) Mud Pumps
WW-440 | 14W-400 | 15W-600 | 9W-1000
Gaso Mud Pump
1563 | 1740-55 | 1844-60 | 2010-50 | 2200-49 | 2651 | 2652
Gardner Denver Mud Pumps
FF-FXF;FG-FXG;A thru L FD-FXX FC-FXX FD-FXD FC-FXD FY-FXD GP-GXP
GR-GXP GP-GXR GR-GXR PA-8 PJ8 PZ-7 PZ-8 PZ-9 PZ-10 PZ-11 PXL
Ideco Mud Pumps
MM-200 | MM-300 | MM-500 | MM-500F | MM-550
Ideco Mud Pumps
MM-550F | MM-700 | MM-700F | T-500
Ideco Mud Pumps
T-800 | T-1000 | T-1300 | T-1600
National Mud Pumps
C-150 | C-250 | C-350 | E-500 | E-700 | G-700 | G-1000
National Mud Pumps
K-280 | K-380 | K-500 | K-500A | K-700A
National Mud Pumps
7P-50 | 8P-80 | 9P-100 | 10P-130 | 12P-160
Oilwell Mud Pumps
6P-HD | 610-P | 212-P | 214-P | 218-P
Oilwell Mud Pumps
350-PT | 560-PT | A-560-PT | 850-PT | A-850-PT | 1100-PT
Oilwell Mud Pumps
A-1100-PT | 1400-PT | A-1400-PT | 1700-PT | A-1700-PT
OPI Mud Pumps
350-D | 700-HDL | 1000-HDL
Wheatley Mud Pumps
1036 | 6070 | 7024 | 7036
Wilson Mud Pumps
600 | 900
| MISSION "L" MODULE FOR EMSCO FC1600 7500 PSI SWOP VERSION PRESSURE
FLUID END MODULE & ACCESSORIES |
| | | | |
| ITEM # | SW PART # | MISSION PART # | DESCRIPTION | QTY PER PUMP |
| 8490-25ALEW | | FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEMS 1-22) | 3 |
| 1 | 8490-26LEW | | MODULE, SUCTION STUDDED (INCLUDES ITEMS 1, 7-8) | 3 |
| 2 | 8490-27LEW | | MODULE, DISCHARGE STUDDED (INCLUDES ITEMS 2-9) | 3 |
| 3 | 4019-54 | | STUD, DISCHARGE TO SUCTION MODULE | 18 |
| 4 | 1-3/4-8 HH | 6300281 | NUT, DISCHARGE TO SUCTION STUD | 18 |
| 5 | 4019-52 | | STUD, POWER END | 30 |
| 6 | 1-1/2-8 HH | 0-7601-0630-28 | NUT, POWER END STUD | 30 |
| 7 | Feb-15 | OWA17TRSSW | STUD, THREADED RING | 72 |
| 8 | 1-1/4-7 HH | 6300200 | NUT, THREADED RING STUD | 72 |
| 9 | May-88 | 6511416 | PIN, DOWELL | 6 |
| 10 | 4019-51 | 7006444 | CAPSCREW, LINER RETAINER FLANGE 3/4-10X3 | 18 |
| 11 | 8490-28 | | PLATE, LINER WEAR | 3 |
| 12 | 2988 | 1290344 | GASKET, WEAR PLATE AND MODULE - RUBBER (SEE DATASHEET FOR ALT
MATLS) | 6 |
| 13 | 568-443 | 99609443 | O-RING, WEAR PLATE | 3 |
| 14 | 6490-25 | | FLANGE, LINER RETAINER (LINER BUSHING) | 3 |
| 15 | 6590-25 | | NUT, LINER RETAINER | 3 |
| 16 | 4690-25A | | ASSY, VALVE COVER PLUG (INCLUDES ITEMS 15,16, 20-22) | 6 |
| 17 | | | PLUG, VALVE COVER | 6 |
| 18 | 4488-25 | | RING, THREADED (THREADED FLANGE) | 6 |
| 19 | 4588-25 | | CAP, THREADED (SCREW GLAND) | 6 |
| 20 | P-115 | 7207115 | SEAL, VALVE COVER PLUG - RUBBER (SEE DATASHEET FOR ALTERNATE
MATERIALS) | 6 |
| 21 | 4788R-25 | | ASSEMBLY, VALVE GUIDE (INCLUDES ITEMS 20 & 21) | 6 |
| 22 | 4700I | *20200004 | BUSHING, VALVE GUIDE (BUNA) | 6 |
| 23 | 4018-18 | 700030711 | SCREW, VALVE GUIDE | 12 |
| 24 | 4018-19 | 700048511 | CAPSCREW, SUCTION MANIFOLD | 24 |
| 25 | 568-442 | 99609442 | GASKET, SUCTION MANIFOLD | 3 |
