
Premium can make all model mud pump liners of Weatherford, such as E-2200 mud pump, E-447 mud pump, E-600 mud pump, E-800 mud pump,
MP5 mud pump, MP-8 mud pump, MP-10 mud pump, MP13 mud pump, MP 16
mud pumps.
Part number of E2200 mud pump liner:
E-2200 Mud Pump | 1806118 | 1806120/1244331 | 1806122/1292705 | 1806122/1292705 | 1806124/1280615 | 1806126/1280614 | 1806128/1244330 |
High Chrome Sleeve Liner
The outer hull, or body, of the liner is a high strength forging. Premium uses forgings exclusively to ensure the consistent quality. The
sleeve is centrifugally cast in the Premium facilities by skilled craftsmen. It has the maximum amount of
chrome for the base metal and Premium adds molybdenum to increase the hardness depth. The sleeve is then
inserted into the hull at a tightness that exceeds its
counterparts. The liner is rated to match the pressure rating of
the pump per liner size.
Features:
High Strength forged steel outer hull
Rated for all drilling operations up to 5,000 PSI and above
Bore hardness is 62 - 69 Rockwell
HP design to prevent inner sleeve slippage
Extremely long service life
Premium manufactures chrome alloy sleeved liners, hardened liners,
hardened / chrome plated liners and Zirconia liners. Premium also
supplies genuine U.S. made rubber and urethane liner seals. All our
liner products are exchangeable with OEM products and meet or
exceed API-7K standards.
All our liners are made with a high strength forged steel shell
machined to fit triplex pumps and fitted with high pressure lip
sleeve. The liner is precision machined to exact tolerances to keep
the liner concentric. The sleeve is manufactured to the bore
tolerances specified by API to provide longer life by reducing gaps
between the liner bore and piston.
Zirconia Liner
Premium's zirconia liner offers life time cost savings,
significantly longer service, better performance and safer
operation than those made of more commonly used alumina ceramic.
Premium's zirconia liner is a proprietary Zirconium-based matrix
that has significantly improved mechanical characteristics.
◎ Zirconia has three important property advantages compared to
alumina.
◎ Zirconia exhibits better impact strength.
◎ Zirconia is harder than alumina.
◎ Zirconia can be honed to finer surface finishes than alumina.
Finished to 4 RMS,
◎Zirconia liners - provide a surface finish that's three to four
times finer than alumina.
All three of these property advantages translate to lower ownership
costs. The improved wear directly extends the service life of the
sleeve, while the improved impact strength cuts down on the
significant costs of replacing broken liners in the field. The
surface finish improvements, meanwhile, have an indirect effect.
◎ HP design with shoulder-on-hull design to prevent sleeve slippage
◎ Reduced liner and piston wear
◎ Rated for all drilling operations up to 7500 PSI
◎ Bore hardness of 92-94 Rockwell
◎ ID tolerances of +.010”/ -.000”
◎ Surface finish of 4 - 8 RMS
◎ Hardness i s HV 0.3 kg/mm – 1100/1200 ( 92 - 94 Rc)
◎ High pressure design to prevent slippage
◎ Liner sizes are available from 4½” to 7” for all popular mud pump

All our fluid end parts are manufactured to API 7K quality
standards.
Parts are available for these popular pump models:

BOMCO/Emsco Mud Pumps:F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350,
DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,
National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220,
E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG,
KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,
Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200
Russian Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L,
NB125, NB80, NB50, NB32
WEATHERFORD/Ellis Williams: MP-5, MP-8, MP-10, MP-13, MP-16, E-447, E-2200, E1600
Drillmec: 9T1000, 12T1600, 7TS600, 7TS500, 9T800,14T2200
Romania: 3PN-1000, 3PN-1600, 3PN-2000