Parts are available for these popular pump models:
BOMCO/Emsco Mud Pumps:F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,
National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG, KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,
Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200
Russian Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L, NB125, NB80, NB50, NB32
WEATHERFORD/Ellis Williams: E-447, E-2200
Drillmec: 9T1000, 12T1600, 7TS600, 7TS500, 9T800
Romania: 3PN-1000, 3PN-1600, 3PN-2000
And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson, Gaso, Skytop/Brewster.
107. 29. 30.00 十字头总成 CROSSHEAD ASSEMBLY (附图六)
| 序号 | 名称 | Description | 代 | 号 Part No. | 数量 Qty |
| No. | F-1600 | F-1300 | F-1600L |
| 1 | 盘根盒 | DIAPHRAGM STUFFING BOX | 107.29.30.06 | 107.29.30.06 | 107.29.30.06 | 3 |
| 2 | 0形密封圈7.484” | O-RING RUBBER | 7601-1610-22 | 7601-1610-22 | 7601-1610-22 | 3 |
| 3 | 密封垫 | GASKET | 107.29.30.07 | 107.29.30.07 | 107.29.30.07 | 3 |
| 4 | 介杆 | EXTENT I ON CROSSHEAD | 107.29.30.08 | 107.29.30.08 | 107.29.30.08 | 3 |
| 5 | 麟J 1"-8UNRCx2.5”(63.5)-2A | SCREW | LNB/AC1-15-09 | LNB/AC1-15-09 | LNB/AC1-15-09 | 12 |
| 6 | 十字头销 | PIN, CROSSHEAD | 107.29.30.09 | 107.29.30.09 | 107.29.30.09 | 3 |
| 7 | 销压板 | RETAINER, PIN | 107.29.30.10 | 107.29.30.10 | 107.29.30.10 | 3 |
| 8 | 轴承 0286x0206x222 | BEARING | 107.076. CG | 107.076. GG | 107.076. CG | 3 |
| 9 | 十字头 | CROSSHEAD | 107.29.30.11 | 107.29.30.11 | 107.29.30.11 | 3 |
| 10 | 上导板 | CROSSHEAD GUIDE UPPER | 107.29.30.12 | 107.29.30.12 | 107.29.30.12 | 3 |
| 11 | 锁紧块 | LOCKING PLATE | 107.29.30.13 | 107.29.30.13 | 107.29.30.13 | 24 |
| 12 | 腳嵌聪3伯蠅2,師5) | SCREW, SOCKET | LS7601-0341-86 | LS7601-0341-86 | LS7601-0341-86 | 24 |
| 13 | 下导板 | CROSSHEAD GUIDE LOWER | 107.29.30.14 | 107.29.30.14 | 107.29.30.14 | 3 |
| 14 | 密封垫 | GASKET | 107.29.30.15 | 107.29.30.15 | 107.29.30.15 | 2 |
| 15 | 螺栓 1"-8UNCx2.25"(57) | SCREW | LNB/AC1-2-07 | LNB/AC1-2-07 | LNB/AC1-2-07 | 6 |
| 16 | 骡栓 1"-8UNCx2.50”(63.5) | SCREW | LNB/AC1-2-07 | LNB/AC1-2-07 | LNB/AC1-2-07 | 12 |
| 17 | 黯 3/8"-16UNM188”(22.3) | SCREW | LNB/AC1-1-05 | LNB/AC1-1-05 | LNB/AC1-1-05 | 12 |
| 18 | 垫圈3/8" | WASHER | LNB/AC3-3-07 | LNB/AC3-3-07 | LNB/AC3-3-07 | 12 |
| 19 | 蟻栓 5/8"-11UNCxL5”(38.1) | SCREW | LNB/AC1-1-05 | LNB/AC1-1-05 | LNB/AC1-1-05 | 28 |
| 20 | 垫圏5/8"N | WASHER | LNB/AC3-1-03 | LNB/AC3-1-03 | LNB/AC3-1-03 | 28 |
| 21 | 钢丝 01.2 L=6m | WIRE | 107.29.30.05 | 107.29.30.05 | 107.29.30.05 | 1 |
107. 29. 30. 00 十字头总成 CROSSHEAD ASSEMBLY (附图六)
| 序号 | 名称 | Description | 代 号 Part No. | 数量 Qty |
| No. | F-1600 | F-1300 | F-1600L |
| 22 | 双头螺纹管DN10X2wNPT | NIPPLE | 101-0401-04-02-02-L | 101-0401-04-02-02-L | 101-0401-04-02-02-L | 4 |
| 23 | 外麒接头3/8” | CONNECTOR | 7601-2730-07 | 7601-2730-07 | 7601-2730-07 | 3 |
| 24 | 铜管总成3/8" | TUBING ASSEMBLE | 107.29.32.00 | 107.29.32.00 | 107.29.32.00 | 3 |
| 25 | 侧板盖 | CROSSHEAD DOOR | 107.29.30.01 | 107.29.30.01 | 107.29.30.01 | 2 |
| 26 | 单唇油封 | SINGLE LIP OIL SEAL | 7602-2131-47 | 7602-2131-47 | 7602-2131-47 | 3 |
| 27 | 0形密封圏6.225" | O-RING RUBBER | 7602-1600-39 | 7602-1600-39 | 7602-1600-39 | 3 |
| 28 | 弹簧 | SPRING, STUFFING BOX | 107.29.30.16 | 107.29.30.16 | 107.29.30.16 | 3 |
| 29 | 双唇油封 | DOUBLE LIP OIL SEAL | 7602-2132-76 | 7602-2132-76 | 7602-2132-76 | 3 |
| 30 | 锁紧弹簧 | LOCK SPRING | 107.29.30.17 | 107.29.30.17 | 107.29.30.17 | 3 |
| 31 | 调整垫片50x370 60.2 | SHIM | 107.29.30.02 | 107.29.30.02 | 107.29.30.02 | 24 |
| 32 | 调整垫片50x370 60.1 | SHIM | 107.29.30.03 | 107.29.30.03 | 107.29.30.03 | 24 |
| 33 | 调整垫片50x370 60.05 | SHIM | 107.29.30.04 | 107.29.30.04 | 107.29.30.04 | 按需 |
107.29.110. 00 液力端总成 FLUID END ASSEMBLY (附图八)
| 序号 | 名称 | Description | 代 | 号 Part No. | 数量 Qty |
| No. | F-1600 | F-1300 | |
| 1 | 液睥栓装配图 | STUDDED ASSEMBLY,FLUID END | 107.29.111.00 | 107.29.111.00 | | 3 |
| 2 | 幡 | VALVE POT COVER FLUID END | 107.29.110.01 | 107.29.110.01 | | 3 |
| 3 | 导向套 | VALVE GUIDE | 107.29.110.09 | 107.29.110.09 | | 3 |
| 4 | 定位板 | RETAINER VALVE GUIDE | 107.29.110.10 | 107.29.110.10 | | 3 |
| 5 | 排岀管 | DISCHARGE MANIFOLD | 107.29.110.02 | 107.29.110.02 | | 1 |
| 6 | 欄导向 | LOWER VALVE GUIDE | 107.29.113.00 | 107.29.113.00 | | 3 |
| 7 | 法兰 | RING,ALIGNMENT | 107.29.114.00 | 107.29.114.00 | | 3 |
| 8 | 导向锁紧螺栓 | BOLT,VALVE GUIDE LOCK | 107.29.110.11 | 107.29.110.11 | | 3 |
| 9 | 耐磨垫 | WEAR PLATE | 107.29.110.12 | 107.29.110.12 | | 3 |
| 10 | 插头压盖 | PLUG,CYLINDER HEAD | 107.29.115.00 | 107.29.115.00 | | 3 |
| 11 | 压盖 | HEAD,CYLINDER | 107.29.110.13 | 107.29.110.13 | | 3 |
| 12 | 法兰 | RING, CYLINDER THREAD | 107.29.110.14 | 107.29.110.14 | | 3 |
107. 29.110. 00 液力端总成 FLUID END ASSEMBLY (附图八)
| 序号 | 名称 | Description | 代 | 号 Part No. | 数量 Qty |
| No. | F-1600 | F-1300 | |
| 13 | 吸入管 | MANIFOLD,SUCTION | 107.29.112.00 | 107.29.112.00 | | 1 |
| 14 | 吸入管法兰 | FLANGE, SUCTION | 107.29.110.03 | 107.29.110.03 | | 1 |
| 15 | 盲板 | FLANGE, BLIND | 107.29.110.04 | 107.29.110.04 | | 1 |
| 16 | 缸套压环 | LOCK, LINER | 107.29.110.15 | 107.29.110.15 | | 3 |
| 17 | 缸套座 | LINER LOCK THREAD RING | 107.29.110.16 | 107.29.110.16 | | 3 |
| 18 | 嗥栓 7/8"-9UNCx2.5"(63) | SCREW | LNB/AC1-1-07 | LNB/AC1-1-07 | | 18 |
| 19 | 密封垫 | GASKET | 107.29.110.17 | 107.29.110.17 | | 6 |
| 20 | 警示牌 | VffiHAVLE GUIDE INFOWTIOPLAIE | 107.29.110.05 | 107.29.110.05 | | 3 |
| 21 | 0形密封圈3.725" | O-RING RUBBER | 7602-1600-25 | 7602-1600-25 | | 3 |
| 22 | .形密封圈13.475” | O-RING RUBBER | 7602-1600-52 | 7602-1600-52 | | 3 |
| 23 | 0形密封圈7.225" | O-RING RUBBER | 7602-1600-61 | 7602-1600-61 | | 3 |
| 24 | 嗥钉M4x10 | SCREW | GB/T67-2000 | GB/T67-2000 | | 12 |
| 25 | 喷淋软管 | HOSE ASSEMBLY | 107.29.116.00 | 107.29.116.00 | | 3 |
| 26 | 90.内外丝弯头1/2" | ELBOW | 7601-2570-89 | 7601-2570-89 | | 3 |
| 27 | 働赠 DN 25 X15-NPT X NPT | BUSHING | 101-0401-03-19-001 | 101-0401-03-19-001 | | 3 |
| 28 | 45°加直離接头7/8"-1/2" | ADAPTER | 7601-2090-40 | 7601-2090-40 | | 3 |
| 29 | 黯 3/8"-16UNCx3/4”(19) | SCREW | LNB/AC1-2-05 | LNB/AC1-2-05 | | 12 |
| 30 | 铜丝 0)1.6 L=2m | WIRE | 107.29.110.06 | 107.29.110.06 | | 1 |
| 31 | 嗥栓 1"-8UNCx5”(127) | SCREW | LNB/AC1-1-05 | LNB/AC1-1-05 | | 36 |
| 32 | A型嗥母1"-8UNC | NUT,HEAVY HEX | LNB/AC2-2-05 | LNB/AC2-2-05 | | 36 |
| 33 | 阀总成(带筋式)API 7# | VALVE AND SEAT | 060155041 | 060155041 | | 6 |
| 34 | 阀座(带筋式)API 7# | VALVE AND SEAT | 061101507 | 061101507 | | 6 |
107. 29. 110.00 液力端总成 FLUID END ASSEMBLY (附图八)
| 序号 | 名称 | Description | 代 | 号 Part No. | 数量 Qty |
| No. | F-1600 | F-1300 | |
| 35 | 麟簧 | SPRING, VALVE | 055413397 | 055413397 | | 6 |
| 36 | 全贓双魏柱(带嗥母) | STUD WITH NUTS | 7601-1260-47 | 7601-1260-47 | | 16 |
| 37 | 椭圆形金属环垫 | SEAL, RING JOINT | 7602-0661-11 | 7602-0661-11 | | 2 |
| 38 | 密封圈 | SEAL, VALVE POT COVER | 107.29.110.18 | 107.29.110.18 | | 3 |
| 39 | 密封圈 | SEAL, HEAD | 107.29.110.19 | 107.29.110.19 | | 3 |
| 40 | 安舗接管 | PIPE, CONECTOR | LS1292Z. 01.40.00 | LS1292Z. 01.40.00 | | 1 |
| 41 | 啓切式安全阀 | SHEAR RELIEF VALVE | AQF-IIA | AQF-IIA | | 1 |
| 42 | 密封圈 | SEAL | 107.05C.03 | 107.05C.03 | | 1 |
| 43 | 自锁姗 1 1/2"-8UN | NUT, HEAVY LOCK | LS7601-0720-58 | LS7601-0720-58 | | 3 |
| 44 | 自锁婀M39X3 | NUT, HEAVY LOCK | 107.35.124.00 | 107.35.124.00 | | 3 |
| 45 | 0形密封圈7.975" | O-RING RUBBER | 7602-1600-44 | 7602-1600-44 | | 3 |
| 46 | 钮套挡圈 | RING LINER LOCK | 107.29.110.20 | 107.29.110.20 | | 3 |
| 47 | 阀总成(导架式) | VALVE AND SEAT | 107.11.140.00 | 107.11.140.00 | | 6 |
| 48 | 阙总成(飜式) | VALVE AND SEAT | 107.11.144.00 | 107.11.144.00 | | 6 |
| 49 | 阀賴 | SPRING,VALVE | 107.11.110.16 | 107.11.110.16 | | 6 |
| 50 | 单头管丝1/2”x13” | PIPE NIPPLE | 107.29.110.21 | 107.29.110.21 | | 3 |
| 51 | 拦水板 | LINER END COVER | 107.29.110.22 | 107.29.110.22 | | 3 |
| 52 | 活塞杆卡麒成 | CLAMP PI SION ROD | 107.29.118.00 | 107.29.118.00 | | 3 |
| 53 | 活塞杆(英制) | ROD, PISTON | 107.29.110.23 | 107.29.110.23 | | 3 |
| 54 | 活塞杆(公制) | ROD, PISTON | 107.29.110.24 | 107.29.110.24 | | 3 |
| 55 | 缸套 0)5.5"(6139.7) | LINER | 107.35.110.30 | 107.35.110.30 | | 3 |
| 55 | 缸套 06” (6152.40) | LINER | 107.35.110.31 | 107.35.110.31 | | 3 |
| 序号 | 名称 | Description | 代 | 号 Part No. | 数量 Qty |
| No. | F-1600 | F-1300 | |
| 55 | 缸套 66.25" (558.75) | LINER | 107.35.110.32 | 107.35.110.32 | | 3 |
| 55 | 缸套 06.75" (6171.45) | LINER | 107.35.110.33 | 107.35.110.33 | | 3 |
| 55 | 缸套 6 7" (6177.80) | LINER | 107.35.110.34 | 107.35.110.34 | | 3 |
| 55 | 缸套 67.5" (6190.5) | LINER | 107.35.110.35 | 107.35.110.35 | | 3 |
| 56 | 缸套0140 | LINER | 107.35.110.22 | 107.35.110.22 | | 3 |
| 56 | 缸套0150 | LINER | 107.35.110.23 | 107.35.110.23 | | 3 |
| 56 | 缸套0160 | LINER | 107.35.110.24 | 107.35.110.24 | | 3 |
| 56 | 缸套0170 | LINER | 107.35.110.25 | 107.35.110.25 | | 3 |
| 56 | 缸套0180 | LINER | 107.35.110.26 | 107.35.110.26 | | 3 |
| 56 | 缸套0190 | LINER | 107.35.110.27 | 107.35.110.27 | | 3 |
| 57 | 活塞誠05.5"伽39.70") | PISTON | 107.114.00 | 107.114.00 | | 3 |
| 57 | 活蹒呻邮2.4") | PISTON | 107.116.00 | 107.116.00 | | 3 |
| 57 | 醫誡 W25"(5>158J5") | PISTON | 107.117.00 | 107.117.00 | | 3 |
| 57 | 活塞誠86.5"伽65」0") | PISTON | 107.118.00 | 107.118.00 | | 3 |
| 57 | 證誠師75"何17L45") | PISTON | 107.119.00 | 107.119.00 | | 3 |
| 57 | 活塞誠岫蚓7.78") | PISTON | 107.120.00 | 107.120.00 | | 3 |
| 57 | 醫觥叽5"伽90.5") | PISTON | 107.122.00 | 107.122.00 | | 3 |
| 58 | 活塞总成0140 | PISTON | 107.06.64.00 | 107.06.64.00 | | 3 |
| 58 | 活塞总成0150 | PISTON | 107.06.66.00 | 107.06.66.00 | | 3 |
| 58 | 活塞总成0160 | PISTON | 107.06.68.00 | 107.06.68.00 | | 3 |
| 58 | 活塞总成财70 | PISTON | 107.06.70.00 | 107.06.70.00 | | 3 |
| 58 | 活塞总成0180 | PISTON | 107.11.130.00 | 107.11.130.00 | | 3 |
| 58 | 活塞总成0190 | PISTON | 107.11.135.00 | 107.11.135.00 | | 3 |
| 序号 | 名称 | Description | 代号 Part No. | 数量 Qty | 序号 | 名称 | Description | 代号 Part No. | 数量 Qty |
| No. | No. |
| 1 | 活塞杆卡腳 | CLAMP PI SION ROD | 107.29.118.00 | 3 | 24 | 嗥检 7/8"-9UNCx2.5"(63) | SCREW | LNB/AC1-1-07 | 18 |
| 2 | 喷淋软管 | HOSE ASSEMBLY | 107.29.116.00 | 3 | 25 | 吸入管 | MANIFOLD, SUCTION | 107.29.112.00 | 1 |
| 3 | 挡水板 | BAFFLE DISK | 107.29.110.22 | 3 | 26 | 吸入管法兰 | FLANGE, SUCTION | 107.29.110.03 | 1 |
| 4 | 单头管丝1/2”x13” | PIPE NIPPLE | 107.29.110.21 | 3 | 27 | 0 型潮 13.475° | O-RING RUBBER | 7602-1600-52 | 3 |
| 5 | 活塞杆(公制) | ROD, PISTON | 107.29.110.24 | 3 | 28 | 骡栓 1"-8UNCx5”(127) | BOLT | LNB/AC1-1-05 | 36 |
| 6 | 活塞杆(英制) | ROD, PISTON | 107.29.110.23 | 3 | 29 | A醐 1"-8UNC | NUT | LNB/AC2-2-05 | 36 |
| 7 | 排岀管 | DISCHARGE MANIFOLD | 107.36.110.01 | 1 | 30 | 盲板 | FLANGE, BLIND | 107.29.110.04 | 1 |
| 8 | 0型密封圈3.725" | O-RING RUBBER | 7602-1600-25 | 3 | 31 | 定位销1"x2” | DOWEL PIN | LNB/AC4-2-05 | 12 |
| 9 | 法兰 | RING,CYLINDER THREAD | 107.36.110.02 | 6 | 32 | 密封垫 | GASKET | 107.35.110.09 | 6 |
| 10 | 压盖 | THREAD RETAINER | 107.36.110.03 | 6 | 33 | 排出睥检装配总成 | STUDDED FLUID END (DICHARGE) | 107.36.122.00 | 3 |
| 11 | 阀盖 | VALVE POT COVER FLUID END | 107.35.110.06 | 6 | 34 | 齣 1 1/2-6UNRCx5"(127)-2A | SCREW | LNB/AC1-4-09 | 24 |
| 12 | 密封圈 | SEAL | 107.29.110.18 | 6 | 35 | 耐磨垫 | WEAR PLATE | 107.36.110.04 | 3 |
| 13 | 定位板 | RETAINER VALVE GUIDE | LS6323-0093-00 | 6 | 36 | 密封垫 | GASKET | 107.29.110.17 | 3 |
| 14 | 螺栓 3/8"T6UNCx3/4”(19) | SCREW | LNB/AC1-2-05 | 24 | 37 | 自锁螺母1 1/2 “-8UN | HEAVY HEX LOCK NUT | LS7601-0720-58 | 3 |
| 15 | 钢丝们.6 L=2m | WIRE | 107.36.110.06 | 1 | 38 | 90.内外丝弯头1/2" | ELBOW | 7601-2570-89 | 3 |
| 16 | 闹导向 | VALVE GUIDE | 107.35.110.07 | 6 | 39 | £1套座 | SPACER, MODULE | 107.36.110.05 | 3 |
| 17 | 导向套 | BUSHING VALVE GUIDE | 107.35.110.08 | 6 | 40 | 缸套压环 | LOCK, LINER | 107.29.110.15 | 3 |
| 18 | 阀賴 | SPRING, VALVE | LS55413421 | 6 | 41 | 0型密封圈7.975” | O-RING RUBBER | 7602-1600-44 | 3 |
| 19 | 阀总成(飜式)API 7# | VALVE AND SEAT | 060155041 | 6 | 42 | 任套挡圈 | RING LINER LOCK | 107.29.110.20 | 3 |
| 20 | 闹座(带筋式)API 7# | VALVE SEAT | 061101507 | 6 | 43 | 自鼬母1139x3 | NUT,HEAVY LOCK | 107.35.124.00 | 3 |
| 21 | 吊环螺钉3/4z,-10UNC | LIFTING SCREW | LNB/AC1-12-03 | 6 | 44 | 支架总成 | SUPPORT ASSEMBLY | 107.35.124.00 | 2 |
| 22 | 吸入睥栓装配总成 | STUDDED FLUID END (SUCTION) | 107.36.120.00 | 3 | 45 | 全螺纹双头嗥柱(带嗥母) | STUD WITH NUTS | 7601-1260-47 | 16 |
| 23 | 0形密封圈7.225” | O-RING RUBBER | 7602-1600-61 | 3 | 46 | 内夕曜丝 DN 25x15-NPTxNPT | BUSHING | 101-0401-03-19-008 | 3 |
| 10 | 107.06.58.00 | Piston assembly Ф110 | 15 | 3.631 | |
| 11 | 107.06.60.00 | Piston assembly Ф120 | 15 | 3.92 | |
| 12 | 107.06.62.00 | Piston assembly Ф130 | 15 | 4.85 | |
| 13 | 107.06.64.00 | Piston assembly Ф140 | 15 | 5.53 | |
| 14 | 107.06.66.00 | Piston assembly Ф150 | 15 | 6.2 | |
| 15 | 107.06.68.00 | Piston assembly Ф160 | 15 | 6.66 | |
| 16 | 107.15.110.15 | Liner Ф110 | 6 | 60.51 | |
| 17 | 107.15.110.16 | Liner Ф120 | 6 | 55.05 | |
| 18 | 107.15.110.17 | Liner Ф130 | 6 | 49.09 | |
| 19 | 107.15.110.18 | Liner Ф140 | 6 | 42.64 | |
| 20 | 107.15.110.19 | Liner Ф150 | 6 | 35.78 | |
| 21 | 107.15.110.20 | Liner Ф160 | 6 | 28.32 | |
| 22 | 107.11.110.07 | Seal | 12 | 0.05 | |
| 23 | 107.14.110.08 | Valve cover | 3 | 12 | |
| 24 | 107.14.110.11 | Locking clip | 3 | 2.1 | |
| 25 | 107.14.124.00 | Spray hose | 3 | 0.97 | |
| 26 | 107.15.01.01 | Intermediate rod | 3 | 28.3 | |
| 27 | 107.15.97.00 | Single lip oil seal | 12 | 0.07 | Intermediate rod |
| 28 | 107.15.110.08 | Cover | 3 | 40 | |
| 29 | 107.15.110.22 | Nipple | 3 | 0.63 | |
| 30 | 107.15.110.23 | Piston rod | 6 | 10.6 | |
| 31 | 107.15.110.24 | Wear plate | 3 | 3.3 | |
| 32 | 107.15.110.29 | Locking plate | 3 | 2.47 | |
| 33 | 107.15.110.31 | Cage | 3 | 18 | |
| 34 | 107.15.110.32 | Seal | 3 | 01 | Liner, horizontal |
| 35 | 107.15.140.00 | Piston rod clamp | 3 | 10.4 | |
| 36 | 107.130.05 | Bolt 1"-8UN-2A | 3 | 0.24 | Dampener |
| 37 | 107.130.01.00-1 | diaphragm | 3 | 9.85 | Dampener |
| 38 | GB93-87 | Gasket 27 | 3 | 0.03 | Dampener |
| 39 | D4-4-66 | O-ring Ф140x5.7 | 3 | 0.02 | Dampener |
| 40 | 107.130.02 | Rubber plate | 3 | 4.4 | Dampener |
| 41 | 107.130.04 | End plate | 3 | 0.6 | Dampener |
| 42 | AQF-Ⅱ | Shear relief valve | 1 | 32 | |
| 43 | YK-100 | Anti-vibration pressure gauge 0~60MPa | 1 | 4 | |
12.2 3NB1000C (107.14.00)
| Item | Drawing No. | Description | Qty | Unit weight kg | Remarks |
| 1 | 107.04.09 | Ring Ф190xФ178x8.6 | 6 | 0.28 | Liner pilot bushing |
| 2 | 107.04.110.10 | Sleeve | 6 | 0.07 | |
| 3 | 107.04.110.13 | Ring Ф210xФ180x15 | 6 | 0.13 | Suction manifold |
| 4 | 107.04.110.21 | Ring Ф155xФ140x10 | 4 | 0.18 | Both ends of discharge manifold |
| 5 | 107.04.120.00 | Locknut M39x3 | 24 | 0.9 | |
| 6 | 107.04.140.00 | Valve assy. (guide ring) | 48 | 10.74 | |
| 7 | 107.04.110.55 | Seal | 3 | 0.1 | Upper valve cover |
| 8 | 107.04.110.57 | Spring | 6 | 0.75 | |
| 9 | 107.06.60.00 | Piston assembly Ф120 | 15 | 4.21 | |
| 10 | 107.06.62.00 | Piston assembly Ф130 | 15 | 4.85 | |
| 11 | 107.06.64.00 | Piston assembly Ф140 | 15 | 5.5 | |
| 12 | 107.06.66.00 | Piston assembly Ф150 | 15 | 6.2 | |
| 13 | 107.06.68.00 | Piston assembly Ф160 | 15 | 6.93 | |
| 14 | 107.06.70.00 | Piston assembly Ф170 | 15 | 7.76 | |
| 15 | 107.14.110.24 | Liner Ф120 | 6 | 70 | |
| 16 | 107.14.110.25 | Liner Ф130 | 6 | 63 | |
| 17 | 107.14.110.26 | Liner Ф140 | 6 | 56 | |
| 18 | 107.14.110.27 | Liner Ф150 | 6 | 48 | |
| 19 | 107.14.110.28 | Liner Ф160 | 6 | 40 | |
| 20 | 107.14.110.29 | Liner Ф170 | 6 | 31 | |
| 21 | 107.11.01.02 | Intermediate rod | 3 | 53.5 | |
| 22 | 107.11.97.00 | Single lip oil seal | 12 | 0.1 | Intermediate rod |
| 23 | 107.11.110.07 | Seal | 12 | 0.05 | |
| 24 | 107.11.110.39 | Piston rod | 6 | 18.5 | |
| 25 | 107.11.110.60 | Gasket | 6 | 0.25 | Flange, suction manifold |
| 26 | 107.11.126.00 | Nipple | 3 | 0.254 | |
| 27 | 107.14.110.04 | Cover | 3 | 53 | |
| 28 | 107.14.110.08 | Valve cover | 3 | 12 | |
| 29 | 107.14.110.10 | Locking plate | 3 | 3 | |
| 30 | 107.14.110.11 | Locking clip | 3 | 2.1 | |
| 31 | 107.14.110.12 | Cage | 3 | 18 | |
| 32 | 107.14.110.13 | Ring | 3 | 01 | Liner, horizontal |
| 33 | 107.14.110.16 | Wear plate | 3 | 3.5 | |
| 34 | 107.14.124.00 | Spray hose | 3 | 1 | |
| 35 | 107.14.125.00 | Piston rod clamp | 3 | 13 | |
| 36 | 107.130.02 | Rubber plate | 3 | 4.4 | Dampener |
| 37 | 107.130.04 | End plate | 3 | 0.6 | Dampener |
| 38 | 107.130.05 | Bolt 1"-8UN-2A | 3 | 0.24 | Dampener |
| 39 | 107.130.01.00-1 | Diaphragm | 3 | 9.85 | Dampener |
| 40 | GB93-87 | Gasket 27 | 3 | 0.03 | Dampener |
| 41 | D4-4-66 | O-ring Ф140x5.7 | 3 | 0.02 | Dampener |
| 42 | AQF-Ⅱ | Shear relief valve | 1 | 32 | |
| 43 | YK-100 | Anti-vibration pressure gauge 0~60MPa | 1 | 4 | |
All our fluid end parts are manufactured to API 7K quality standards.
Parts are available for these popular pump models:
BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,
National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG, KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,
Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200
Russian Mud Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L, NB125, NB80, NB50, NB32
WEATHERFORD/Ellis Williams: E-447, E-2200
Drillmec Mud Pump: 9T1000, 12T1600, 7TS600, 7TS500, 9T800
Romania Mud Pump: 3PN-1000, 3PN-1600, 3PN-2000
And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson, Gaso, Skytop/Brewster.
1,Plunger Size 3.38” - 4.00” Valve Part No. P107185 Seat Part No. P107802
Insert Part No. P107186 Spring
2,Plunger Size 4.50” Valve Part No. P107181 Seat Part No. P107180
Insert Part No. P107182 Spring
3,Plunger Size 5.00” - 6.00” Valve Part No. P107188 Seat Part No. P107187
Insert Part No. P107189 Spring4P102382
SPM2000压裂泵的型号及规格
1,Plunger Size 3.75" Plunge Part No 3P103887
2,Plunger Size 4.00" Plunge Part No 3P100339
3,Plunger Size 4.50" Plunge Part No 3P100654
4,Plunger Size" 5.00" Plunge Part No 3P100233
5,Plunger Size" 5.50 Plunge Part No 3P107060
6,Plunger Size" 5.75" Plunge Part No 3P107061
7,Plunger Size 6.00 Plunge Part No 3P107062
SPM压裂泵的型号
TWS 250 Plunger Size 1.75"-3" 3.25"-4"
TWS 400 Plunger Size 2 .50"-3" 3 .50"-4 .50”
TWS 500LW-600 Plunger Size 2 .75" 3"-4 .75"
TWS 600S Plunger Size 2 .50"-3" 3.50"-4 .50"
TWS 900 Plunger Size 3.50"-4"
TWS 1250LW Plunger Size 4"
OPI880 Plunger Size 3.75" 4.00” 4.5” 5.0:” 5.50” 5.75” 6.0”
TWS1000LW,TWS1300
Plunger Size 3.75" 4.00” 4.5” 5.0:” 5.50” 5.75” 6.0” 6.5 “ 6.75”
TWS1600 Plunger Size 3.5” 3.75” 4.0” 4.50” 5.0” 5.5” 5.75 “6.0”
TWS1800 Plunger Size 3.5” 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0”
TWS2250 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2000 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2500 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
5.50” 5.75” 6.0”
TWS2250 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2000 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2500 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5
Brewster ® Mud Pumps B-550 • B-750 • B-1000 • 1100T • B-1300
Continental Emsco ® Mud Pumps F-350 • F-500 • F-650 • F-800 • F-1000 • FA-1300 • FB-1600 FB1600
Gaso ® Mud Pump 1563 • 1740-55 • 1844-60 • 2010-50 • 2200-49 • 2651 • 2652
Gardner Denver ® Mud Pumps
PAH • PZ-7 PZG • PZ-8 PZH • PZ-9 PZJ • PZ-10 PZK • PZ-11 PZL
Gardner Denver ® Well Service TEE • PE-5 • PA-8 • PAH • PJ-8 • TGF-225
Gardner Denver ® Continuous Duty GD-55T • GD-60T • GD-100T • GD-125T • GD-150T • GD-180T • GD-200T
Ideco ® Mud Pumps MM-200 • MM-300 • MM-500 • MM-500F • MM-550
Ideco ® Mud Pumps MM-550F • MM-700 • MM-700F • T-500
Ideco ® Mud Pumps T-500 • T-800 • T-1000 • T-1300 • T-1600
National ® J Series Mud Pumps J-30 • J-60 • J-100 • J-165 • J-275 • J-375 • J-625 • JWS-340 • JWS-400
National ® Mud Pumps K-280 • K-380 • K-500 • K-500A • K-700A
National ® P Series Mud Pumps 7P-50 • 8P-80 • 9P-100 • 10P-130 • 12-P-160 / 12P-160 / 12P160
Oilwell ® Mud Pumps A-350-PT • 560-PT • A-560-PT • 850-PT • A-850-PT • 1100-PT
Oilwell ® Mud Pumps A-1100-PT • 1400-PT • A-1400-PT • 1700-PT • A-1700-PT / A1700-PT
Oilwell ® Plunger Pumps C-323 through B-558 • SA-640-50 through SB-644-B
OPI ® Mud Pumps 350-D • 00-DL • 700-HDL • 1000-HDL
Wheatley ® Mud Pumps 1036 • 6070 • 7024 • 7036
Fluid End Modules
National® - Oilwell® - Continental Emsco® - Gardner Denver® - Ideco® - Skytop Brewster®
Pulsation Dampener
Hydril Type "K" Pulsation Dampener
Popular Mud Pump Spare Parts
Mud Pump Manufactures and Models include:
Brewster Mud Pumps
B-550 | B-750 | B-1000 | 1100T | B-1300
Continental Emsco Mud Pumps
FF-FXF | FG-FXG (A thrugh L) | FD-FXX | FC-FXX | FD-FXD | FC-FXD | FY-FXD
Continental Emsco Mud Pumps
GP-GXP | GR-GXP | GP-GXR | GR-GXR |PA-8 | PAH
Continental Emsco Mud Pumps
PJ8 | PZ-7 | PZ-8 | PZ-9 | PZ-10 | PZ-11 | PXL
Ellis Williams (Luko) Mud Pumps
WW-440 | 14W-400 | 15W-600 | 9W-1000
Gaso Mud Pump
1563 | 1740-55 | 1844-60 | 2010-50 | 2200-49 | 2651 | 2652
Gardner Denver Mud Pumps
FF-FXF;FG-FXG;A thru L FD-FXX FC-FXX FD-FXD FC-FXD FY-FXD GP-GXP GR-GXP GP-GXR GR-GXR PA-8 PJ8 PZ-7 PZ-8 PZ-9 PZ-10 PZ-11 PXL
Ideco Mud Pumps
MM-200 | MM-300 | MM-500 | MM-500F | MM-550
Ideco Mud Pumps
MM-550F | MM-700 | MM-700F | T-500
Ideco Mud Pumps
T-800 | T-1000 | T-1300 | T-1600
National Mud Pumps
C-150 | C-250 | C-350 | E-500 | E-700 | G-700 | G-1000
National Mud Pumps
K-280 | K-380 | K-500 | K-500A | K-700A
National Mud Pumps
7P-50 | 8P-80 | 9P-100 | 10P-130 | 12P-160
Oilwell Mud Pumps
6P-HD | 610-P | 212-P | 214-P | 218-P
Oilwell Mud Pumps
350-PT | 560-PT | A-560-PT | 850-PT | A-850-PT | 1100-PT
Oilwell Mud Pumps
A-1100-PT | 1400-PT | A-1400-PT | 1700-PT | A-1700-PT
OPI Mud Pumps
350-D | 700-HDL | 1000-HDL
Wheatley Mud Pumps
1036 | 6070 | 7024 | 7036
Wilson Mud Pumps
600 | 900
