| NATIONAL 9-P-100 | | |
| FLUID END MODULE & ACCESSORIES | | |
| ITEM # | TSC PART # | DESCRIPTION |
| 1 | TS-1293240 | MODULE, STUDDED FLUID END DISCHARGE ( INCLUDES ITEMS 1,3-6, 9-11,
30&31) |
| 2 | TS-1290338 | MODULE, STUDDED FLUID END SUCTION (INCLUDES ITEMS 2,3,4 ) |
| 3 | TS-2408019 | STUD, THREADED RING |
| 4 | TS-6300220 | NUT, THREADED RING STUD |
| 5 | TS-2408030 | STUD, POWER FRAME |
| 6 | TS-6300200 | NUT, POWER FRAME STUD |
| 7 | TS-2402560 | STUD,TOP TAPER LOCK (FOR BLIND RING AND WELD NECK FLANGES) |
| 8 | TS-6300200 | NUT, STUD (BLIND RING AND WELD NECK FLANGES) |
| 9 | TS-2408034 | STUD, DISCHARGE MODULE TO SUCTION MODULE |
| 10 | TS-6300241 | NUT, DISCHARGE TO SUCTION MODULE STUD |
| 11 | TS-6511416 | PIN, DOWELL |
| 12 | TS-1292141 | BUSHING,VALVE GUIDE |
| 13 | TS-1292140 | RETAINER, VALVE GUIDE BUSHING |
| 14 | TS-1540126 | GASKET, VALVE COVER |
| 15 | TS-1290174 | RETAINER, SEAL |
| 16 | TS-1290178 | SCREW, ADJUSTING WEDGE |
| 17 | TS-G-1290376 | ASSEMBLY, WEDGE (INCLUDES ITEM #18 WEDGE SPRING) |
| 18 | TS-1290181 | SPRING, WEDGE |
| 19 | TS-1290308 | RING, THREADED |
| 20 | TS-1290307 | CAP, VALVE COVER (THREADED) |
| 21 | TS-1290315 | WASHER, WEDGE ADJUSTING SCREW |
| 22 | TS-6300160 | NUT, WEDGE ADJUSTING SCREW |
| 23 | TS-2410031427 | SEAL,DISCHARGE CONNECTOR & DISCHARGE ADAPTER |
| 24 | TS-1290343 | ADAPTER, DISCHARGE CONNECTOR |
| 25 | TS-2410031348 | SEAL,DISCHARGE CONNECTOR TO DISCHARGE ADAPTER |
| 26 | TS-1290342 | CONNECTOR, DISCHARGE |
| 27 | TS-700030511 | CAPSCREW, DISCHARGE CONNECTOR (WASHER INCLUDED) |
| 28 | TS-1290357 | PLATE, WEAR |
| 29 | TS-1293165 | BUSHING, LINER(SAME AS 8P-80 & 10P-130) |
| 30 | TS-2408018 | STUD, LINER BUSHING |
| 31 | TS-6300160 | NUT, LINER BUSHING STUD |
| 32 | TS-1293166 | ASSEMBLY, LINER CLAMP (INCLUDES ITEMS 32,33,34,35,36,37) |
| 33 | TS-7000448-11 | CAPSCREW, LINER CLAMP |
| 34 | TS-6309120 | NUT, LINER CAPSCREW |
| 35 | TS-1290169 | PIN, CONNECTOR |
| 36 | TS-1290168 | CONNECTOR, LINER CLAMP |
| 37 | TS-6571420 | PIN, SPRING |
| 38 | TS-1290344 | SEAL, MODULE & WEARPLATE |
| 39 | TS-1590051 | SEAL, SUCTION MANIFOLD |
| NATIONAL 10-P-130 | | |
| FLUID END MODULE & ACCESSORIES | | |
| ITEM # | TSC PART # | DESCRIPTION |
| 01 | TS-1290335 | MODULE, STUDDED FLUID END DISCHARGE ( INCLUDES ITEMS 1,3-6, 9-11,
30,&31) |
| 02 | TS-1290338 | MODULE, STUDDED FLUID END SUCTION (INCLUDES ITEMS 2,3,4 ) |
| 03 | TS-2408019 | STUD, THREADED RING |
| 04 | TS-6300220 | NUT, THREADED RING STUD |
| 05 | TS-2408020 | STUD, POWER FRAME |
| 06 | TS-6300240 | NUT, POWER FRAME STUD |
| 07 | TS-2402560 | STUD,TOP TAPER LOCK (FOR BLIND RING AND WELD NECK FLANGES) |
| 08 | TS-6300220 | NUT, STUD (BLIND RING AND WELD NECK FLANGES) |
| 09 | TS-2408034 | STUD, DISCHARGE MODULE TO SUCTION MODULE |
| 10 | TS-6300241 | NUT, DISCHARGE TO SUCTION MODULE STUD |
| 11 | TS-6511416 | PIN, DOWELL |
| 12 | TS-1292141 | BUSHING,VALVE GUIDE |
| 13 | TS-1292140 | RETAINER, VALVE GUIDE BUSHING |
| 14 | TS-1540126 | GASKET, VALVE COVER |
| 15 | TS-1290174 | RETAINER, SEAL |
| 16 | TS-1290178 | SCREW, ADJUSTING WEDGE |
| 17 | TS-G1290376 | ASSEMBLY, WEDGE (INCLUDES ITEM #18 WEDGE SPRING) |
| 18 | TS-1290181 | SPRING, WEDGE |
| 19 | TS-1290308 | RING, THREADED |
| 20 | TS-1290307 | CAP, VALVE COVER (THREADED) |
| 21 | TS-1290315 | WASHER, WEDGE ADJUSTING SCREW |
| 22 | TS-6300160 | NUT, WEDGE ADJUSTING SCREW |
| 23 | TS-1290343 | ADAPTER, DISCHARGE CONNECTOR |
| 24 | TS-2410031427 | SEAL,DISCHARGE CONNECTOR TO DISCHARGE ADAPTER |
| 25 | TS-1290342 | CONNECTOR, DISCHARGE |
| 26 | TS-2410031348 | SEAL,SUCTION CONNECTOR TO DISCHARGE ADAPTER |
| 27 | TS-700030511 | CAPSCREW, DISCHARGE CONNECTOR (WASHER INCLUDED) |
| 28 | TS-1290357 | PLATE, WEAR |
| 29 | TS-1290165 | BUSHING, LINER |
| 30 | TS-2408018 | STUD, LINER BUSHING |
| 31 | TS-6300160 | NUT, LINER BUSHING STUD |
| 32 | TS-1290166 | ASSEMBLY, LINER CLAMP (INCLUDES ITEMS 32,33,34,35,36,37) |
| 33 | TS-700044811 | CAPSCREW, LINER CLAMP |
| 34 | TS-6309120 | NUT, LINER CAPSCREW |
| 35 | TS-1290169 | PIN, CONNECTOR |
| 36 | TS-1290168 | CONNECTOR, LINER CLAMP |
| 37 | TS-6571420 | PIN, SPRING |
| 38 | TS-1290344 | SEAL, MODULE & WEARPLATE |
| 39 | TS-1590051 | SEAL, SUCTION MANIFOLD |
| GARDNER DENVER PZ-7, PZ-8, PZ-9 | | |
| FLUID END MODULE & ACCESSORIES | | |
| ITEM # | TSC PART # | DESCRIPTION |
| 01 | TS-205PZL029D | FLUID END MODULE STUDDED (INCLUDES 1-9 ) |
| 02 | TS-79L188 | STUD, FRAME & LINER CLAMP |
| 03 | TS-50B36 | NUT (FOR ABOVE) |
| 04 | TS-79L73 | STUD, FRAME |
| 05 | TS-50AQ30 | NUT (FOR ABOVE) |
| 06 | TS-79AL6 | STUD, VALVE COVER |
| 07 | TS-50B34 | NUT (FOR ABOVE) |
| 08 | TS-202PZL110 | STUD, DISCHARGE MANIFOLD |
| 09 | TS-50B34 | NUT (FOR ABOVE) |
| 10 | TS-2011861 | RING, VALVE COVER GASKET EXPANDER |
| 11 | TS-2011862(G-749) | GASKET, VALVE COVER |
| 12 | TS-2007674 | BUSHING, VALVE GUIDE |
| 13 | TS-2011860 | COVER, VALVE |
| 14 | TS-2011699 | RING, VALVE COVER THREADED |
| 15 | TS-2011857 | CAP, VALVE COVER LOCK |
| 16 | TS-2011701 | PLATE, RETAINER |
| 17 | TS-2011700 | GUIDE, VALVE SUCTION |
| 18 | TS-95W2 | WASHER, LOCK 1/2" 316SS |
| 19 | TS-655EE06S | SCREW 1/2"x1 3/4" 316SS HX HD C/S |
| 20 | TS-25AL35 | GASKET, DISCHARGE MANIFOLD |
| 21 | TS-25G41 | GASKET, SUCTION MANIFOLD |
| 22 | TS-1PV14 | CLAMP, LINER |
| 23 | TS-2011706 | ASSY., LOWER VALVE GUIDE (INCLUDES 12, 16 -19) |
SOUTHWEST 8482-A
National 14P-220
| ITEM | P/N | DESCRIPTION | QTY |
| 8482-A | FLUID END ASSEMBLY: (CONSISTS OF ITEMS 3, 4, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25,
26, 27, 28, 32, 33, 34) | |
| 1 | 6382G-XX | LINER (REFER TO GUIDE FOR ORDERING CHART FOR TYPE (G); (Y); AND FOR BORE
SIZE (XX)) | 3 |
| 2 | 2930-XX | LINER SEAL | 3 |
| 3 | 8482-4 | WEARPLATE | 3 |
| 4 | 2930-09 | WEARPLATE & MODULE SEAL | 6 |
| 5 | XX-BYY | PISTON (REFER TO GUIDE FOR ORDERING CHART FOR SIZE (XX) AND FOR TYPE (YY)) | 3 |
| 6 | 568-225 | PISTON O-RING | 3 |
| 7 | 6282W32 | PISTON ROD (W/ ELASTIC STOP NUT) | 3 |
| 8 | API-4ESN | PISTON ROD ELASTIC STOP NUT | 3 |
| 9 | 6282-1 | SUB ROD | 3 |
| 10 | 6282CWY | ROD CLAMP (CONSIST OF 10A, 10B, 10C) (FOR CLAMP ONLY USE 6282C) | 6 |
| 10A | 1200H30 | HOSE (1/2” X 30” WITH ½” MALE X 3/8” MALE CONNECTIONS) | 6 |
| 10B | 1200160 | PIPE (3/8” X 16” GALVANIZED AND THREADED ON ONE END) | 6 |
| 10C | 4019-77 | ROD CLAMP BOLT (3/4-10 GRADE 8 BOLT WITH LOCK NUT AND WASHER) | 12 |
| 11 | 6200G82 | PONY ROD | 3 |
| 12 | | VALVE | 6 |
| 13 | | VALVE INSERT (IF REQUIRED) | 6 |
| 14 | | VALVE SPRING | 6 |
| 15 | | VALVE SEAT | 6 |
| SWTM1700 | HYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION IN CATALOG) | 1 |
| 16 | 4482 | THREADED FLANGE | 6 |
| 17 | 4582 | SCREW GLAND | 6 |
| 18 | 4682A | PLUG (COMPLETE WITH VALVE GUIDE, BUSHING, AND SCREWS, AND BUSHING) | 6 |
| 19 | P113 | HP VALVE COVER PLUG NITRILE SEAL | 6 |
| 20 | 4782R | VALVE GUIDE (COMPLETE W/ BUSHING #4700I) | 6 |
| 21 | 4700I | VALVE GUIDE INSERT (ALSO AVAILABLE IN URETHANE PART# 4700IU) | 6 |
| 22 | 4019-75 | VALVE GUIDE SCREW | 24 |
| 23 | 4015-54 | VALVE COVER STUD (WITH SW PART# HHN1500-6 1 ½-6 HEAVY HEX NUT) | 84 |
| 24 | 4019-24 | POWER END STUD (WITH SW PART# HHN1500-6 1 1/2-6 HEAVY HEX NUT) | 30 |
| 25 | 6482 | LINER RETAINER FLANGE | 3 |
| 26 | 4015-52 | LINER RETAINER STUD (WITH SW PART# HHN1250-7 1 ¼-7 HEAVY HEX NUT) | 18 |
| 27 | 6582 | LINER RETAINER NUT | 3 |
| 28 | 4019-74 | SUCTION MODULE STUD (WITH SW PART# HHN2000-8 2-8 HEAVY HEX NUT) | 18 |
| 29 | 4018-19 | SUCTION MANIFOLD CAP SCREW | 24 |
| 30 | 8582 | SUCTION MANIFOLD | 1 |
| 31 | AJO326 | SUCTION MANIFOLD SEAL | 3 |
| 32 | 8482-2S | SUCTION MODULE | 3 |
| 33 | 8482-1D | DISCHARGE MODULE | 3 |
| 34 | 8488-5 | DOWEL PIN | 6 |
| 35 | 2982-3 | DISCHARGE END ADAPTER SEAL | 2 |
| 36 | 4017-4 | DISCHARGE END ADAPTER CAP SCREW | 24 |
| 37 | BX169 | RING JOINT | 2 |
| 38 | 4020-21 | BLIND FLANGE STUDS (WITH SW PART# HHN1125-7 1-1/8”-7 HEAVY HEX NUTS) | 24 |
| 39 | 2982-2 | DISCHARGE CONNECTOR SEAL | 4 |
| 40 | 8382-1 | DISCHARGE CONNECTOR | 2 |
| 41 | 8382-3 | DISCHARGE CONNECTOR BACK-UP RING | 2 |
| 42 | 4018-18 | DISCHARGE CONNECTOR CAPSCREW | 16 |
| 43 | 2982-1 | DISCHARGE CONNECTOR END SEAL | 2 |
| 44 | 8382-2 | DISCHARGE CONNECTOR ADAPTER | 2 |
| 45 | 8382-4 | DISCHARGE END FLANGE ADAPTER | 2 |
SOUTHWEST 8488-1A
Oilwell A-1700-PT/A-1400-PT
| ITEM | P/ N | DESCRIPTION | QTY |
| 8488-1A | FLUID END ASSEMBLY: (CONSISTS OF ITEMS: 3, 4, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26,
27, 28, 28A, 29, 30, 33, 34, 35,36,39) | |
| 1 | 1388-XX | LINER (REFER TO GUIDE FOR ORDERING CHART FOR TYPE (G); (Y); AND FOR BORE
SIZE (XX) | 3 |
| 2 | 2974-XX | LINER SEAL (REFER TO GUIDE TO ORDERING CHART FOR TYPE AND SIZE (XX) | 3 |
| 3 | 8488-4 | WEARPLATE | 3 |
| 4 | 2974-1 | WEARPLATE AND MODULE SEAL (ALSO AVAILABLE IN URETHANE PART# 2974-1U) | 6 |
| 5 | XX-BYY | PISTON (REFER TO GUIDE FOR ORDERING CHART FOR SIZE (XX) AND FOR TYPE (YY) | 3 |
| 5A | 2932 | PISTON BUSHING (FROM 1 5/8” TO 1 ½” STRAIGHT BORE) | 3 |
| 6 | 568-225 | PISTON O-RING | 3 |
| 7 | 1290HW25 | PISTON ROD (WITH ELASTIC STOP NUT) | 3 |
| 8 | API-4ESN | PISTON ROD ELASTIC STOP NUT | 3 |
| 9 | 1290W2 | PISTON ROD CONNECTING STUD (WITH WATER HOLE) | 3 |
| 10 | 1290HW1 | SUB ROD | 3 |
| 11 | 1290CW | ROD CLAMP (CONSIST OF 11A, 11B, 11C) (FOR CLAMP ONLY, USE 1290C) | 3 |
| 11A | 1200H30 | HOSE (1/2” X 30” WITH 1/2” MALE X 3/8” MALE CONNECTIONS) | 3 |
| 11B | 1200120 | PIPE (3/8” X 12” GALVANIZED AND THREADED ON ONE END) | 3 |
| 11C | 4018-94 | ROD CLAMP BOLT (5/8-11 GRADE 8 BOLT WITH LOCK NUT AND WASHER) | 6 |
| 12 | 1200G90 | PONY ROD | 3 |
| 13 | | VALVE | 6 |
| 14 | | VALVE INSERT (IF REQUIRED) | 6 |
| 15 | | VALVE SPRING | 6 |
| 16 | | VALVE SEAT | 6 |
| SWTM1700 | HYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION IN CATALOG FOR DETAILS) | 1 |
| 4475-1A | SOUTHWEST HP QUICK-CHANGE VALVE COVER ASSEMBLY: (CONSISTS OF ITEM 17-24) | |
| 17 | 4475 | THREADED FLANGE | 6 |
| 18 | 4575 | SCREW GLAND | 6 |
| 19 | 4675-1A | PLUG (COMPLETE WITH VALVE GUIDE; BUSHING; AND SCREWS) | 6 |
| 20 | P129 | HP VALVE COVER PLUG SEAL (AVAILABLE IN URETHANE PART# P129U) | 6 |
| 21 | 4775R | VALVE GUIDE (COMPLETE WITH BUSHING #4700I) | 6 |
| 22 | 4700I | VALVE GUIDE BUSHING (ALSO AVAILABLE IN URETHANE PART# 4700IU) | 6 |
| 23 | 4018-88 | VALVE GUIDE SCREW | 12 |
| 24 | 4015-2 | VALVE COVER STUD (WITH SW PART# HHN1250-7 1 ¼-7 HEAVY HEX NUT) | 72 |
| 25 | 4016-96 | POWER END STUD (WITH SW PART# HHN1750-8 1 ¾-8 HEAVY HEX NUT) | 12 |
| 26 | 4017-4 | LINER RETAINER FERRY HEAD CAP SCREW | 24 |
| 27 | 6488-1 | LINER RETAINER FLANGE | 3 |
| 28 | 6588-1 | LINER RETAINER NUT (FOR LARGE BODY LINER) | 3 |
| 28A | 8488-7 | LINER RETAINER SET SCREW | 9 |
| 29 | 4016-97 | SUCTION MODULE STUD (WITH SW PART# HHN1500-8 1-1/2”-8 HEAVY HEX NUT) | 18 |
| 30 | 4018-70 | SUCTION MANIFOLD CAPSCREW (WITH LOCK WASHER) | 24 |
| 31 | 8588-50 | SUCTION MANIFOLD (FRONT OR SIDE INLET) | 1 |
| 32 | 80102003 | SUCTION MANIFOLD GASKET | 3 |
| 33 | 8488-2S | SUCTION MODULE (STUDDED ONLY) | 3 |
| 34 | 8488-1D | DISCHARGE MODULE (STUDDED ONLY) | 3 |
| 35 | 8488-5 | DOWEL PIN | 6 |
| 36 | 2988 | MODULE GASKET | 1 |
| 37 | 8388A | DISCHARGE MANIFOLD | 3 |
| 38 | 568-345 | DISCHARGE MANIFOLD GASKET | 12 |
| 39 | 4016-3 | DISCHARGE MANIFOLD STUD (WITH SW PART# HHN1375-8 1-3/8”-8 HEAVY HEX NUT) | |
All our fluid end parts are manufactured to API 7K quality
standards.
Parts are available for these popular pump models:
BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000,
F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500,
D-375, D-700,
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,
National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220,
E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG,
KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,
Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200
Russian Mud Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L,
NB125, NB80, NB50, NB32
WEATHERFORD/Ellis Williams: E-447, E-2200
Drillmec Mud Pump: 9T1000, 12T1600, 7TS600, 7TS500, 9T800
Romania Mud Pump: 3PN-1000, 3PN-1600, 3PN-2000
And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson,
Gaso, Skytop/Brewster.
1,Plunger Size 3.38” - 4.00” Valve Part No. P107185 Seat Part No.
P107802
Insert Part No. P107186 Spring
2,Plunger Size 4.50” Valve Part No. P107181 Seat Part No. P107180
Insert Part No. P107182 Spring
3,Plunger Size 5.00” - 6.00” Valve Part No. P107188 Seat Part No.
P107187
Insert Part No. P107189 Spring4P102382
SPM2000压裂泵的型号及规格
1,Plunger Size 3.75" Plunge Part No 3P103887
2,Plunger Size 4.00" Plunge Part No 3P100339
3,Plunger Size 4.50" Plunge Part No 3P100654
4,Plunger Size" 5.00" Plunge Part No 3P100233
5,Plunger Size" 5.50 Plunge Part No 3P107060
6,Plunger Size" 5.75" Plunge Part No 3P107061
7,Plunger Size 6.00 Plunge Part No 3P107062
SPM压裂泵的型号
TWS 250 Plunger Size 1.75"-3" 3.25"-4"
TWS 400 Plunger Size 2 .50"-3" 3 .50"-4 .50”
TWS 500LW-600 Plunger Size 2 .75" 3"-4 .75"
TWS 600S Plunger Size 2 .50"-3" 3.50"-4 .50"
TWS 900 Plunger Size 3.50"-4"
TWS 1250LW Plunger Size 4"
OPI880 Plunger Size 3.75" 4.00” 4.5” 5.0:” 5.50” 5.75” 6.0”
TWS1000LW,TWS1300
Plunger Size 3.75" 4.00” 4.5” 5.0:” 5.50” 5.75” 6.0” 6.5 “ 6.75”
TWS1600 Plunger Size 3.5” 3.75” 4.0” 4.50” 5.0” 5.5” 5.75 “6.0”
TWS1800 Plunger Size 3.5” 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0”
TWS2250 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2000 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2500 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
5.50” 5.75” 6.0”
TWS2250 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2000 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2500 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5
Brewster ® Mud Pumps B-550 • B-750 • B-1000 • 1100T • B-1300
Continental Emsco ® Mud Pumps F-350 • F-500 • F-650 • F-800 •
F-1000 • FA-1300 • FB-1600 FB1600
Gaso ® Mud Pump 1563 • 1740-55 • 1844-60 • 2010-50 • 2200-49 • 2651
• 2652
Gardner Denver ® Mud Pumps
PAH • PZ-7 PZG • PZ-8 PZH • PZ-9 PZJ • PZ-10 PZK • PZ-11 PZL
Gardner Denver ® Well Service TEE • PE-5 • PA-8 • PAH • PJ-8 •
TGF-225
Gardner Denver ® Continuous Duty GD-55T • GD-60T • GD-100T •
GD-125T • GD-150T • GD-180T • GD-200T
Ideco ® Mud Pumps MM-200 • MM-300 • MM-500 • MM-500F • MM-550
Ideco ® Mud Pumps MM-550F • MM-700 • MM-700F • T-500
Ideco ® Mud Pumps T-500 • T-800 • T-1000 • T-1300 • T-1600
National ® J Series Mud Pumps J-30 • J-60 • J-100 • J-165 • J-275 •
J-375 • J-625 • JWS-340 • JWS-400
National ® Mud Pumps K-280 • K-380 • K-500 • K-500A • K-700A
National ® P Series Mud Pumps 7P-50 • 8P-80 • 9P-100 • 10P-130 •
12-P-160 / 12P-160 / 12P160
Oilwell ® Mud Pumps A-350-PT • 560-PT • A-560-PT • 850-PT •
A-850-PT • 1100-PT
Oilwell ® Mud Pumps A-1100-PT • 1400-PT • A-1400-PT • 1700-PT •
A-1700-PT / A1700-PT
Oilwell ® Plunger Pumps C-323 through B-558 • SA-640-50 through
SB-644-B
OPI ® Mud Pumps 350-D • 00-DL • 700-HDL • 1000-HDL
Wheatley ® Mud Pumps 1036 • 6070 • 7024 • 7036
Fluid End Modules
National® - Oilwell® - Continental Emsco® - Gardner Denver® -
Ideco® - Skytop Brewster®
Pulsation Dampener
Hydril Type "K" Pulsation Dampener
Popular Mud Pump Spare Parts
