SOUTHWEST “OLD STYLE” 8476-A
National 12-P-160
| ITEM | P/N | DESCRIPTION | QTY |
| 8476-A | FLUID END ASSEMBLY: (CONSISTS OF ITEMS 3,4,16,17,18,19, 20,
21,22,23,24,25,26,27,28,29,31,32,33,34,&47) | |
| 1 | 1376YXX | LINER (REFER TO GUIDE TO ORDERING CHART FOR TYPE (Y) AND FOR SIZE (XX)) | 3 |
| 2 | 2930-XX | LINER SEAL (REFER TO GUIDE TO ORDERING CHART FOR TYPE AND SIZE (XX)) | 3 |
| 3 | 8476-3 | WEARPLATE | 3 |
| 4 | 2988 | WEARPLATE AND MODULE SEAL | 6 |
| 5 | XX-BYY | PISTON (REFER TO GUIDE TO ORDERING CHART FOR SIZE (XX) AND FOR TYPE (YY)) | 3 |
| 6 | 568-225 | PISTON O-RING | 3 |
| 7 | 1286-32 | PISTON ROD (WITH ELASTIC STOP NUT) | 3 |
| 8 | API-4ESN | PISTON ROD ELASTIC STOP NUT | 3 |
| 9 | 1286-1 | SUB ROD | 3 |
| 10 | 1286CWY | ROD CLAMP (CONSIST OF 10A, 10B, 10C) (FOR CLAMP ONLY, USE 1286C) | 6 |
| 10A | 1200H30 | HOSE (1/2” X 30” WITH 1/2” MALE X 3/8” MALE CONNECTIONS) | 3 |
| 10B | 1200140 | PIPE | 3 |
| 10C | 4018-92 | ROD CLAMP BOLT (7/8 X 5” GRADE 8 BOLT WITH LOCK NUT AND WASHER) | 12 |
| 11 | 1200G86 | PONY ROD | 3 |
| 12 | | VALVE | 6 |
| 13 | | VALVE INSERT (IF REQUIRED) | 6 |
| 14 | | VALVE SPRING | 6 |
| 15 | | VALVE SEAT | 6 |
| SWTM1700 | HYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS PAGE OF CATALOG FOR DETAILS) | |
| 4476-2A | SOUTHWEST HP QUICK-CHANGE VALVE COVER ASSEMBLY (CONSISTS OF ITEMS 16-23) | 6 |
| 16 | 4476 | THREADED FLANGE | 6 |
| 17 | 4597 | SCREW GLAND | 6 |
| 18 | 4676-2A | PLUG (COMPLETE WITH VALVE GUIDE, SCREWS, AND BUSHING) | 6 |
| 19 | P107 | HP VALVE COVER PLUG SEAL | 6 |
| 20 | 4776R | VALVE GUIDE (COMPLETE WITH BUSHING #4700I) | 6 |
| 21 | 4700I | VALVE GUIDE BUSHING | 6 |
| 22 | 4016-98 | VALVE GUIDE SCREW | 12 |
| 23 | 4015-54 | VALVE COVER STUD (WITH SW PART# HHN1500-6 1-1/2-6” HEAVY HEX NUT) | 72 |
| 24 | 4015-95 | POWER END STUD (WITH SW PART# HHN1375-6 1-3/8”6 HEAVY HEX NUT) | 30 |
| 25 | 4017-65 | LINER RETAINER FERRY HEAD CAP SCREW | 18 |
| 26 | 6476 | LINER RETAINER FLANGE | 3 |
| 27 | 6576 | LINER RETAINER NUT | 3 |
| 28 | 4018-17 | SUCTION MODULE STUD (WITH SW PART# HHN1750-6 1-3/4”-6 HEAVY HEX NUT) | 18 |
| 29 | 4018-19 | SUCTION MANIFOLD CAP SCREW (WITH LOCK WASHER) | 24 |
| 30 | 8576-50 | SUCTION MANIFOLD (FRONT OR SIDE INLET) | 1 |
| 31 | AJO419R | SUCTION MANIFOLD GASKET | 3 |
| 32 | 8476-2S | SUCTION MODULE (STUDDED ONLY) | 3 |
| 33 | 8476-1D | DISCHARGE MODULE (STUDDED ONLY) | 3 |
| 34 | 8488-5 | DOWEL PIN | 6 |
| | ITEMS NUMBERS 35 THRU 46 ARE NOT SHOWN INTENTIONALLY | |
| 47 | 4018-18 | DISCHARGE CONNECTOR CAP SCREW (WITH LOCK WASHER) | 16 |
| 48 | 4018-39 | DISCHARGE SPACER FLANGE SOCKET HEAD CAP SCREW | 16 |
| 49 | 8376-1 | DISCHARGE CONNECTOR | 2 |
| 50 | 8376-2 | DISCHARGE ADAPTER | 2 |
| 51 | 8376-3 | BACK-UP RING | 4 |
| 52 | 8376-4 | DISCHARGE SPACER FLANGE | 2 |
| 53 | 2976-3 | DISCHARGE SPACER FLANGE SEAL | 2 |
| 54 | 2976-1 | DISCHARGE CONNECTOR / ADAPTER PACKING | 2 |
| 55 | 2976-2 | DISCHARGE CONNECTOR / ADAPTER PACKING | 4 |
| 56 | R44D | RING JOINT GASKET | 2 |
| 57 | 4017-22 | DISCHARGE SPACER FLANGE STUD (WITH SW PART# HHN1500-6 1-1/2”-6 HEAVY HEX NUT) | 16 |
Southwest
A1400/1700PT Mud Pump
| "L" MODULE FOR A-1400-PT, A-1700PT | QTY PER PUMP |
| FLUID END MODULE & ACCESSORIES |
| ITEM # | OEM PART # | MISSION PART # | DESCRIPTION |
| 8488-1A | FEMA17ASSYSW | FLUID END MODULE COMPLETE ASSY. (INCLUDES ITEMS: 1-28) | 3 |
| 1 | 8488-1D | FEMA17DISSW | MODULE, DISCHARGE - (INCLUDES ITEMS 1,
4,5,6,7,8,9,10,11,12,&13) | 3 |
| 2 | 8488-2S | FEMA17SUCSW | MODULE, SUCTION (INCLUDES ITEMS 2,11,12,& 27) | 3 |
| 3 | 6488-1 | OWA17LRPLATESW | PLATE, LINER RETAINER | 3 |
| 4 | 4017-4 | PEP68 | CAPSCREW, ALLEN HEAD | 24 |
| 5 | 4016-3 | OWA17DMSSW | STUD, DISCHARGE MANIFOLD | 12 |
| 6 | | EMSF1000TRSN | NUT, DISCHARGE MANIFOLD STUD | 12 |
| 7 | 4016-96 | OWA17PFSSW | STUD, POWER FRAME | 12 |
| 8 | | PEP55 | NUT, POWER FRAME STUD | 12 |
| 9 | 4016-97 | OWA17DSUCSSW | STUD, DISCHARGE TO SUCTION MODULE | 18 |
| 10 | | EMSF1000PFSN | NUT, FOR ABOVE STUD | 18 |
| 11 | 4015-2 | OWA17TRSSW | STUD, THREADED RING | 72 |
| 12 | | PZ789LCSN | NUT, THREADED RING STUD | 72 |
| 13 | 8488-5 | PEP70 | PIN, DOWELL | 6 |
| 14 | 2988 | 1290344 | SEAL, DISCHARGE TO SUCTION MODULE | 3 |
| 15 | 2974-1 | 20100008 | SEAL, WEAR PLATE - RUBBER (SEE DATASHEET FOR ALTERNATE MATERIALS) | 3 |
| 16 | 8488-4 | PP602850 | PLATE, WEAR | 3 |
| 17 | 6588-1 | OWA17LLNSW | NUT, LINER LOCK | 3 |
| 18 | P-129 | 07207129 | SEAL, VALVE COVER - RUBBER (SEE DATASHEET FOR ALTERNATE MATERIALS) | 6 |
| 19 | 4018-88 | PEP73 | SCREW, VALVE COVER RETAINER | 12 |
| 20 | 4775R | OWA17VGSW | GUIDE, VALVE (INCLUDES ITEMS 20,& 22) | 6 |
| 21 | 4675-1A | OWA17VCASSYSW | PLUG, VALVE COVER (INCLUDES ITEMS 19,20,21,&22) | 6 |
| 22 | 4700-I | PZ789VGI | BUSHING, VALVE GUIDE | 6 |
| 23 | 4475 | OWA17FLGSW | RING, THREADED | 6 |
| 24 | 4575 | OWA17CAPSW | CAP, THREADED | 6 |
| 25 | 80102003 | 10300201 | GASKET, SUCTION MANIFOLD | 3 |
| 26 | 568-345 | 99609345 | GASKET, DISCHARGE MANIFOLD | 3 |
| 27 | 4018-70 | 75634382 | CAPSCREW,SUCTION MANIFOLD | 24 |
| 28 | 8488-7 | PEP90 | SETSCREW, LINER RETAINER | 9 |
All our fluid end parts are manufactured to API 7K quality
standards.
Parts are available for these popular pump models:
BOMCO/Emsco Mud Pumps:F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350,
DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,
National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220,
E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG,
KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,
Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200
Russian Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L,
NB125, NB80, NB50, NB32
WEATHERFORD/Ellis Williams: E-447, E-2200
Drillmec: 9T1000, 12T1600, 7TS600, 7TS500, 9T800
Romania: 3PN-1000, 3PN-1600, 3PN-2000
And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson,
Gaso, Skytop/Brewster.
| GARDNER DENVER PZ-10, PZ-11 MISSION MODULE SERIES 7 VALVE SEAT
DECKS | | | | QTY PER PUMP |
| FLUID END MODULE & ACCESSORIES | | | |
| ITEM # | OEM PART # | MISSION PART # | |
| | FEMPZ1011WPCA | FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEMS 1-13, 15-22) | 3 |
| 1 | 202PZL029B | FEMPZ1011 | FLUID END MODULE STUDDED (INCLUDES 1-8 & 24) | 3 |
| 02 | 201PZL110 | PZ1011LCS | STUD, FRAME & LINER CLAMP LONG | 24 |
| 03 | 205PZL110 | PZ1011GPFS | STUD, SHORT | 24 |
| 04 | 50B36 | PZ789LCSN | NUT, FRAME & LINER CLAMP STUD | 72 |
| 05 | 204PZL110 | PZ1011TRS | STUD | 72 |
| 06 | 50B34 | PZ789TRSN | NUT (FOR ABOVE) | 72 |
| 07 | 202PZL110 | PZ789DMS | STUD, DISCHARGE MANIFOLD | 12 |
| 08 | 50B34 | PZ789TRSN | NUT (FOR ABOVE STUD) (SAME AS ITEM 6) | 12 |
| 09 | | | CAPSCREW, SUCTION MANIFOLD - NOT SHOWN | 24 |
| 10 | 200PZL387 | PZ1011FLG | RING, VALVE COVER THREADED | 6 |
| 11 | 204PZL715 | 07916780 | GASKET, VALVE COVER - RUBBER (SEE DATASHEET FOR ALTERNATE
MATERIALS) | 6 |
| 12 | 2007674 | PZ789VGI | BUSHING, VALVE GUIDE | 6 |
| 13 | 200PZL147 | PZ1011VC | COVER, VALVE | 6 |
| | | | |
| 15 | 200PZL587 | PZ1011CAP | CAP, VALVE COVER LOCK | 6 |
| 16 | 2011701 | PZ789PL | PLATE, RETAINER | 3 |
| 17 | 200PZL483 | PZ1011LVG | GUIDE, VALVE SUCTION | 3 |
| 18 | 95W2 | PZLVGAWASHER | WASHER, LOCK 1/2" 316SS | 6 |
| 19 | 655EE065 | PZLVGABOLT | SCREW 1/2" x 1 3/4" 316SS HX HD C/S | 6 |
| 20 | 25AL35 | 07916747 | GASKET, DISCHARGE MANIFOLD | 3 |
| 21 | 25G41 | 07923283 | GASKET, SUCTION MANIFOLD | 3 |
| 22 | 200PZL455 | PZ1011LC | CLAMP, LINER | 3 |
| 23 | 200PZL483A | PZ1011LVGA | ASSY., LOWER VALVE GUIDE ( INCLUDES ITEMS 12, 16-19.) | 3 |
Southwest Oilfield Products is a premier oil and gas equipment
manufacturer that provides Their global customer base with
best-in-class mud and well servicing pump solutions. They
manufacture rugged and reliable equipment for your specific needs
including Mud Pump Fluid Ends, Frac Pump Fluid Ends, Liners,
Pistons and other consumable items.
Their Mud Pump solutions team has been an industry leader since
1947 and is renowned for providing high quality mud pump fluid ends
and consumable parts such as pistons, liners, valves and seats to
drilling companies across the globe. With over 65 years of
manufacturing experience, Their mission is to provide you with
simply the best well servicing equipment and mud pump products.
Southwest Oilfield Products, Inc. is committed to delivering the
highest quality products, on time, and creating positive
significant impacts on their customers’ projects. They strive to
maintain their innovative stance in the industry while partnering
with our customers to share the focus on generating solutions.
| CONTINENTAL EMSCO FC-1600 7500 PSI FLUID END MODULE & ACCESSORIES |
| | | |
| ITEM # | PART # | DESCRIPTION | QTY PER PUMP |
| - | 0-6316-0452-10 | ASSY, COMPLETE FLUID END (INCLUDES MANIFOLDS) | 1 |
| 1 | 0-6316-0610-01 | MODULE, DISCHARGE STUDDED | 3 |
| 2 | 0-6316-0611-00 | MODULE, SUCTION STUDDED | 3 |
| 3 | | STUD, THREADED RING | |
| 4 | | NUT, THREADED RING AND DISCHARGE MANIFOLD STUD | |
| 5 | | STUD, SUCTION TO DISCHARGE MODULE | 6 |
| 6 | | NUT, SUCTION TO DISCHARGE MODULE AND POWER FRAME STUD | 6 |
| 7 | | STUD, DISCHARGE MANIFOLD | |
| 8 | | STUD, POWER FRAME | |
| 9 | 0-7601-0342-29 | CAPSCREW, SPACER FLANGE | 24 |
| 10 | 0-6316-0614-00 | THREADED RETAINER | 6 |
| 11 | 0-6316-0615-00 | THREADED RING | 6 |
| 12 | 0-7601-0040-11 | EYEBOLT, 3/4 X 4.50 | 6 |
| 13 | 0-6316-0616-00 | VALVE POT COVER | 6 |
| 14 | 0-6316-0585-00 | VALVE GUIDE | 6 |
| 15 | 0-6323-0093-00 | RETAINER, VALVE GUIDE | 6 |
| 16 | | CAPSCREW, VALVE GUIDE RETAINER | |
| 16A | | LOCK WASHER, VALVE GUIDE RETAINER CAPSCREW | |
| 17 | 0-6316-0583-00 | BUSHING, VALVE GUIDE | 6 |
| 18 | 0-6316-0092-00 | GASKET, VALVE COVER | 6 |
| 19 | 0-7601-0820-10 | DOWEL PIN | 12 |
| 20 | 0-7602-1600-61 | O-RING (SUCTION MANIFOLD TO F.E.) | 3 |
| 21 | 0-6316-0565-00 | GASKET, FE MODULE & WEAR PLATE | 6 |
| 22 | 0-7602-1600-25 | O-RING (DISCHARGE TO F.E.) | 3 |
| 23 | 0-6316-0566-01 | DISCHARGE MANIFOLD (NOT SHOWN) | 1 |
| 24 | 0-6316-0613-00 | SPACER FLANGE | 3 |
| 25 | 0-6316-0367-20 | LINER LOCK | 3 |
| 26 | 0-6316-0668-00 | WEAR PLATE | 3 |
| 27 | 0-6316-0523-00 | SUCTION MANIFOLD (NOT SHOWN) | 1 |
| 28 | 0-7601-0333-30 | CAPSCREW, SUCTION MANIFOLD | 18 |
| CONTINENTAL EMSCO FC-2200 FLUID END MODULE & ACCESSORIES |
| ITEM # | PART # | DESCRIPTION | QTY PER PUMP |
| - | 0-6323-0100-20 | ASSY, FLUID END COMPLETE (INCLUDES DISCHARGE MANIFOLD) | 1 |
| 1 | 0-6323-0108-00 | MODULE, DISCHARGE STUDDED | 3 |
| 2 | 0-6323-0109-00 | MODULE, SUCTION STUDDED | 3 |
| 3 | 0-6323-0087-90 | RETAINER, THREADED | 6 |
| 4 | 0-6323-0086-90 | RING, THREADED | 6 |
| 5 | 0-6323-0083-00 | COVER, VALVE POT | 6 |
| 6 | 0-6323-0103-00 | GUIDE W/ BUSHING, VALVE | 6 |
| 7 | 0-6323-0126-00 | HANDLER, VALVE POT | 6 |
| 8 | 0-6323-0107-20 | COVER, LINER END | 3 |
| 9 | 0-6323-0129-00 | DISC, BAFFLE | 3 |
| 10 | 0-6323-0085-00 | MANIFOLD, SUCTION | 1 |
| 11 | 0-6316-0105-95 | FLANGE, SUCTION | 1 |
| 12 | 0-6317-0074-95 | FLANGE, BLIND | 1 |
| 13 | 0-6323-0084-10 | DISCHARGE MANIFOLD, 7500 PSI | 1 |
| 14 | 0-6323-0097-90 | WEAR PLATE | 3 |
| 15 | 0-6323-0096-00 | RING, LINER THREAD | 3 |
| 16 | 0-6323-0099-00 | LINER LOCK | 3 |
| 17 | 0-6323-0093-00 | RETAINER, VALVE GUIDE | 6 |
| 18 | 0-6323-0128-00 | SEAL, SUCTION TO DISCHAGE MODULE | 3 |
| 19 | 0-6323-0127-00 | SEAL, WEAR PLATE & LINER - RUBBER (SEE DATASHEET FOR ALTERNATE
MATERIALS) | 6 |
| 20 | 0-7602-1600-47 | O-RING (LINER LOCK RING) | 3 |
| 21 | 7817600456 | O-RING (SUCTION MANIFOLD) | 3 |
| 22 | 0-7602-1600-61 | O-RING (SUCTION MANIFOLD TO F.E.) | 3 |
| 23 | 0-7602-1600-30 | O-RING (DISCHARGE MANIFOLD TO F.E.) | 3 |
| 24 | 0-7501-0051-00 | SCREW, RETAINER | 24 |
| 25 | 7822095 | WIRE, SAFETY SST | 72 |
| 26 | 0-6323-0101-00 | RING, LINER LOCK | 3 |
| 27 | 7000534 | SCREW, SUCTION FLANGE HEX HD | 36 |
| 28 | 0-7601-0630-20 | NUT, HEX 1" - 8 | 36 |
| 29 | 0-6323-0125-00 | SEAL, VALVE POT COVER | 6 |
| 30 | 0-7601-0333-30 | SCREW, SUCTION MANIFOLD TO F.E. | 18 |
| NATIONAL 14-P-220 (7500 PSI) W/ FAST CHANGE VALVE COVERS FLUID END
MODULE & ACCESSORIES |
| ITEM # | OEM PART # | DESCRIPTION | QTY PER PUMP |
| 80718020 | ASSY, COMPLETE FLUID END W/ VALVE SERVICE & SUCTION MANIFOLD | 1 |
| 1 | 1295601 | MODULE, STUDDED FLUID END DISCHARGE (INCLUDES ITEMS 1, 3-10) | 3 |
| 2 | 1295604 | MODULE, STUDDED FLUID END SUCTION (INCLUDES ITEMS 2, 3-4) | 3 |
| 3 | 2408049 | STUD, VALVE COVER | 84 |
| 4 | 6300240 | NUT, VALVE COVER STUD | 84 |
| 5 | 2408027 | STUD, POWER FRAME | 30 |
| 6 | 6300240 | NUT, POWER FRAME STUD | 30 |
| 7 | 2408047 | STUD, LINER BUSHING | 18 |
| 8 | 6300200 | NUT, LINER BUSHING STUD | 18 |
| 9 | 2408048 | STUD, SUCTION TO DISCHARGE MODULE | 18 |
| 10 | 6300320 | NUT, SUCTION TO DISCHARGE MODULE STUD | 18 |
| 11 | 2408014 | STUD, DISCHARGE FLANGE | 12 |
| 12 | 6300180 | NUT, DISCHARGE FLANGE STUD | 12 |
| 13 | 1295262 | SPACER, STUDDED DISCHARGE (NOT SHOWN) INCLUDED ITEM# 11 AND 12 | 2 |
| 14 | 1295258 | SEAL, DISCHARGE SPACER (NOT SHOWN) | 2 |
| 15 | 7006609 | CAPSCREW, DISCHARGE SPACER FLANGE | 24 |
| 16 | 1295176 | RING, THREADED F/C | 6 |
| 17 | 1295172 | CAP, VALVE COVER (THREADED) F/C | 6 |
| 18 | 1292353 | PULLER, SEAL RETAINER | 6 |
| 19 | 1295174 | RETAINER, SEAL | 6 |
| 20 | 1540163 | SEAL, VALVE COVER | 6 |
| 21 | 1292140 | HOLDER, VALVE GUIDE INSERT | 6 |
| 22 | 1292141 | INSERT, VALVE GUIDE | 6 |
| 23 | 1540021 | SEAL, SUCTION MANIFOLD | 3 |
| 24 | 700048511 | CAPSCREW, SUCTION MANIFOLD | 24 |
| 25 | 2410031440 | SEAL, DISCHARGE CONNECTOR & DISCHARGE ADAPTER | 4 |
| 26 | 1295253 | ADAPTER, DISCHARGE CONNECTOR | 2 |
| 27 | 2410031438 | SEAL, DISCHARGE CONNECTOR TO DISCHARGE ADAPTER | 2 |
| 28 | 1295252 | CONNECTOR, DISCHARGE | 2 |
| 28A | 1295175 | RING, DISCHARGE CONNECTOR BACK UP | 4 |
| 29 | 7619050 | WASHER, DISCHARGE CONNECTOR CAPSCREW (NOT SHOWN) | 16 |
| 30 | 700030711 | CAPSCREW, DISCHARGE CONNECTOR | 16 |
| 31 | 6511416 | PIN, DOWELL | 6 |
| 32 | 1295266 | PLATE, WEAR | 3 |
| 33 | 1295165 | BUSHING, LINER | 3 |
| 34 | 1295166 | CLAMP COMPLETE, LINER (INCLUDES ITEMS 34A, 34B, 34C, 34D, 34E, 34F) | 3 |
| 34A | 1295167 | CLAMP, LINER | 3 |
| 34B | 700049110 | CAPSCREW, LINER CLAMP | 6 |
| 34C | 6309140 | NUT, LINER CAPSCREW | 6 |
| MISSION "L" FOR NATIONAL 12-P-160 (7500 PSI WORKING PRESSURE) FLUID
END MODULE & ACCESSORIES |
| ITEM # | OEM PART # | MISSION PART # | QTY PER PUMP |
| 80704032 | ASSY, FLUID END COMPLETE (INCLUDES ITEMS 1-27) ENOUGH FOR 1 PUMP | 1 |
| 80704035 | ASSY, FLUID END COMPLETE W/ BLAK-JAK LINER RETENTION SYSTEM | 1 |
| 80704038 | ASSY, FLUID END COMPLETE W/ ROUGHNECK VALVES L/ LINER BUSHING & NUT
(#'S 19, 20) | 1 |
| 1 | /80704000 | MODULE, DISCHARGE STUDDED (INCLUDES ITEMS 1, 3-10) | 3 |
| 2 | 80704001 | MODULE, SUCTION STUDDED (INCLUDES ITEMS 2, 7-8) | 3 |
| 3 | 80704002 | STUD, DISCHARGE TO SUCTION MODULE | 24 |
| 4 | 75510126 | NUT, HEAVY HEX | 24 |
| 5 | 80704003 | THREADED RING | 6 |
| 6 | 80704004 | THREADED CAP | 6 |
| 7 | /80704005 | VALVE COVER | 6 |
| 8 | 80704006 | DISCHARGE MANIFOLD (7500 PSI WORKING PRESSURE) | 1 |
| 9 | 80702011 | STUD, DISCHARGE MANIFOLD | 12 |
| 10 | 0-7601-0630-24 | NUT, DISCHARGE MANIFOLD STUD | 12 |
| 11 | 12PVGASW | GUIDE, VALVE | 6 |
| 12 | PZ789VGI* | BUSHING, VALVE GUIDE | 6 |
| 13 | 7007303 | SCREW, VALVE GUIDE | 12 |
| 13 | PZ789VGI* | BUSHING, VALVE GUIDE | 6 |
| 14 | PEP75 | CAPSCREW, LINER RETAINER | 18 |
| 15 | 2408029 | | |
| 16 | 6300220 | NUT, POWER FRAME STUD | 30 |
| 17 | PEP70 | DOWELL PIN | 6 |
| 18 | 80700014 | STUD, THREADED RING | 72 |
| 19 | 6300240 | NUT, THREADED RING STUD | 72 |
| 20 | | SUCTION MANIFOLD | 1 |
| 21 | 1290344 | SEAL, DISCH TO SUC & WEARPLATE - RUBBER (SEE DATASHEET FOR ALT
MATLS) | 6 |
| 22 | 7207119 | SEAL, VALVE COVER - RUBBER (SEE DATASHEET FOR ALTERNATE MATERIALS) | 6 |
| 23 | 99609235 | SEAL, DISCHARGE MANIFOLD | 3 |
| 24 | 1540851 | SEAL, SUCTION MANIFOLD | 3 |
| 25 | 700048511 | CAPSCREW, SUCTION MANIFOLD | 3 |
| 26 | PP6021260SW | PLATE, WEAR | 3 |
| 27 | 12PLASW | RETAINER, LINER FLANGE | 3 |
| 28 | 12PLANSW | NUT, LINER RETAINER | 3 |
All our fluid end parts are manufactured to API 7K quality
standards.
Parts are available for these popular pump models:
BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000,
F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500,
D-375, D-700,
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,
National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220,
E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG,
KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,
Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200
Russian Mud Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L,
NB125, NB80, NB50, NB32
WEATHERFORD/Ellis Williams: E-447, E-2200
Drillmec Mud Pump: 9T1000, 12T1600, 7TS600, 7TS500, 9T800
Romania Mud Pump: 3PN-1000, 3PN-1600, 3PN-2000
And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson,
Gaso, Skytop/Brewster.
1,Plunger Size 3.38” - 4.00” Valve Part No. P107185 Seat Part No.
P107802
Insert Part No. P107186 Spring
2,Plunger Size 4.50” Valve Part No. P107181 Seat Part No. P107180
Insert Part No. P107182 Spring
3,Plunger Size 5.00” - 6.00” Valve Part No. P107188 Seat Part No.
P107187
Insert Part No. P107189 Spring4P102382
SPM2000
1,Plunger Size 3.75" Plunge Part No 3P103887
2,Plunger Size 4.00" Plunge Part No 3P100339
3,Plunger Size 4.50" Plunge Part No 3P100654
4,Plunger Size" 5.00" Plunge Part No 3P100233
5,Plunger Size" 5.50 Plunge Part No 3P107060
6,Plunger Size" 5.75" Plunge Part No 3P107061
7,Plunger Size 6.00 Plunge Part No 3P107062
SPM
TWS 250 Plunger Size 1.75"-3" 3.25"-4"
TWS 400 Plunger Size 2 .50"-3" 3 .50"-4 .50”
TWS 500LW-600 Plunger Size 2 .75" 3"-4 .75"
TWS 600S Plunger Size 2 .50"-3" 3.50"-4 .50"
TWS 900 Plunger Size 3.50"-4"
TWS 1250LW Plunger Size 4"
OPI880 Plunger Size 3.75" 4.00” 4.5” 5.0:” 5.50” 5.75” 6.0”
TWS1000LW,TWS1300
Plunger Size 3.75" 4.00” 4.5” 5.0:” 5.50” 5.75” 6.0” 6.5 “ 6.75”
TWS1600 Plunger Size 3.5” 3.75” 4.0” 4.50” 5.0” 5.5” 5.75 “6.0”
TWS1800 Plunger Size 3.5” 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0”
TWS2250 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2000 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2500 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
5.50” 5.75” 6.0”
TWS2250 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2000 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”
QWS 2500 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5
Brewster ® Mud Pumps B-550 • B-750 • B-1000 • 1100T • B-1300
Continental Emsco ® Mud Pumps F-350 • F-500 • F-650 • F-800 •
F-1000 • FA-1300 • FB-1600 FB1600
Gaso ® Mud Pump 1563 • 1740-55 • 1844-60 • 2010-50 • 2200-49 • 2651
• 2652
Gardner Denver ® Mud Pumps
PAH • PZ-7 PZG • PZ-8 PZH • PZ-9 PZJ • PZ-10 PZK • PZ-11 PZL
Gardner Denver ® Well Service TEE • PE-5 • PA-8 • PAH • PJ-8 •
TGF-225
Gardner Denver ® Continuous Duty GD-55T • GD-60T • GD-100T •
GD-125T • GD-150T • GD-180T • GD-200T
Ideco ® Mud Pumps MM-200 • MM-300 • MM-500 • MM-500F • MM-550
Ideco ® Mud Pumps MM-550F • MM-700 • MM-700F • T-500
Ideco ® Mud Pumps T-500 • T-800 • T-1000 • T-1300 • T-1600
National ® J Series Mud Pumps J-30 • J-60 • J-100 • J-165 • J-275 •
J-375 • J-625 • JWS-340 • JWS-400
National ® Mud Pumps K-280 • K-380 • K-500 • K-500A • K-700A
National ® P Series Mud Pumps 7P-50 • 8P-80 • 9P-100 • 10P-130 •
12-P-160 / 12P-160 / 12P160
Oilwell ® Mud Pumps A-350-PT • 560-PT • A-560-PT • 850-PT •
A-850-PT • 1100-PT
Oilwell ® Mud Pumps A-1100-PT • 1400-PT • A-1400-PT • 1700-PT •
A-1700-PT / A1700-PT
Oilwell ® Plunger Pumps C-323 through B-558 • SA-640-50 through
SB-644-B
OPI ® Mud Pumps 350-D • 00-DL • 700-HDL • 1000-HDL
Wheatley ® Mud Pumps 1036 • 6070 • 7024 • 7036
Fluid End Modules
National® - Oilwell® - Continental Emsco® - Gardner Denver® -
Ideco® - Skytop Brewster®
Pulsation Dampener
Hydril Type "K" Pulsation Dampener
Popular Mud Pump Spare Parts
Mud Pump Manufactures and Models include:
Brewster Mud Pumps
B-550 | B-750 | B-1000 | 1100T | B-1300
Continental Emsco Mud Pumps
FF-FXF | FG-FXG (A thrugh L) | FD-FXX | FC-FXX | FD-FXD | FC-FXD |
FY-FXD
Continental Emsco Mud Pumps
GP-GXP | GR-GXP | GP-GXR | GR-GXR |PA-8 | PAH
Continental Emsco Mud Pumps
PJ8 | PZ-7 | PZ-8 | PZ-9 | PZ-10 | PZ-11 | PXL
Ellis Williams (Luko) Mud Pumps
WW-440 | 14W-400 | 15W-600 | 9W-1000
Gaso Mud Pump
1563 | 1740-55 | 1844-60 | 2010-50 | 2200-49 | 2651 | 2652
Gardner Denver Mud Pumps
FF-FXF;FG-FXG;A thru L FD-FXX FC-FXX FD-FXD FC-FXD FY-FXD GP-GXP
GR-GXP GP-GXR GR-GXR PA-8 PJ8 PZ-7 PZ-8 PZ-9 PZ-10 PZ-11 PXL
Ideco Mud Pumps
MM-200 | MM-300 | MM-500 | MM-500F | MM-550
Ideco Mud Pumps
MM-550F | MM-700 | MM-700F | T-500
Ideco Mud Pumps
T-800 | T-1000 | T-1300 | T-1600
National Mud Pumps
C-150 | C-250 | C-350 | E-500 | E-700 | G-700 | G-1000
National Mud Pumps
K-280 | K-380 | K-500 | K-500A | K-700A
National Mud Pumps
7P-50 | 8P-80 | 9P-100 | 10P-130 | 12P-160
Oilwell Mud Pumps
6P-HD | 610-P | 212-P | 214-P | 218-P
Oilwell Mud Pumps
350-PT | 560-PT | A-560-PT | 850-PT | A-850-PT | 1100-PT
Oilwell Mud Pumps
A-1100-PT | 1400-PT | A-1400-PT | 1700-PT | A-1700-PT
OPI Mud Pumps
350-D | 700-HDL | 1000-HDL
Wheatley Mud Pumps
1036 | 6070 | 7024 | 7036
Wilson Mud Pumps
600 | 900
